Datasheet4U Logo Datasheet4U.com

MAX22213 - 3.8A Quad Half H-Bridge Drivers

Description

The MAX22213 provides four individually controllable 36V, 3.8AMAX half H-bridge drivers.

It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads.

Features

  • OCP, thermal shutdown (TSD), and undervoltage lockout (UVLO). An open-drain, activelow FAULT pin is activated every time a fault condition is detected. During TSD and UVLO events, the driver outputs are three-stated until normal operations are restored. The MAX22213 is available into a small 5mm x 5mm, 32-pin TQFN and 4.4mm x 9.7mm, 28-pin TSSOP package.

📥 Download Datasheet

Datasheet preview – MAX22213

Datasheet Details

Part number MAX22213
Manufacturer Analog Devices
File Size 321.28 KB
Description 3.8A Quad Half H-Bridge Drivers
Datasheet download datasheet MAX22213 Datasheet
Additional preview pages of the MAX22213 datasheet.

📁 Similar Datasheet

  • MAX222 - 5-V DUAL RS-232 LINE DRIVER/RECEIVER (Texas Instruments)
  • MAX222 - +5V-Powered / Multichannel RS-232 Drivers/Receivers (Maxim)
  • MAX220 - +5V-Powered Multichannel RS-232 Drivers/Receivers (MAXIM)
  • MAX2202 - RMS Power Detector (Maxim Integrated)
  • MAX2203 - RMS Power Detector (Maxim Integrated Products)
  • MAX2204 - RF Power Detector (Maxim Integrated Products)
  • MAX2205 - RF Power Detectors (Maxim)
  • MAX2206 - RF Power Detectors (Maxim Integrated)
  • MAX2207 - RF Power Detectors (Maxim Integrated)
  • MAX2208 - RF Power Detectors (Maxim)
Other Datasheets by Analog Devices
  • MAX22212 - 7.6A High Current Single H-Bridge
  • MAX22216 - Quad Smart Serial-Controlled Solenoid and Motor Driver
  • MAX22217 - Quad Smart Serial-Controlled Solenoid and Motor Driver
  • MAX22205 - 7.6A High Current Single H-Bridge
  • MAX22163 - 6-Channel Digital Isolators
  • MAX22164 - 6-Channel Digital Isolators
  • MAX22165 - 6-Channel Digital Isolators
  • MAX22166 - 6-Channel Digital Isolators

Full PDF Text Transcription

Click to expand full text
MAX22213 Click here to ask an associate for production status of specific part numbers. 36V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense General Description The MAX22213 provides four individually controllable 36V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance resulting in high driving efficiency and low heat generated. The typical total RON (high side plus low side) is 0.25Ω (typ). Each half bridge can be individually PWM controlled by mean of two logic inputs (DIN_, EN_).
Published: |