Datasheet4U Logo Datasheet4U.com

MAX17335 - AccuCharge + ModelGauge m5 EZ 1-Cell Charger / Fuel Gauge and Protector

General Description

The MAX17335 is a 35μA IQ stand-alone charger, fuel gauge, protector, and battery internal self-discharge detection IC for 1-cell lithium-ion/polymer batteries.

When a voltage source is present, the IC regulates charging by modulating the charge N-FET, using AccuCharge™ charger technology.

Key Features

  • Non-Volatile Programmable Stand-Alone Charger.
  • 1% Charge Current, 256 Current Settings.
  • 0.25% Charge Voltage, 2.42V to 4.8V, Configurable.
  • Optional Manual Charge Control.
  • FET Temperature Limit and Heat Regulation.
  • Prequal, SmartFull, and Step-Charging Options.
  • JEITA.
  • 9 Temperature Regions.
  • Battery Health + Programmable Safety/Protection.
  • Overvoltage/Overcharge Current.
  • Temperature Region Dependent.

📥 Download Datasheet

Datasheet Details

Part number MAX17335
Manufacturer Analog Devices
File Size 3.59 MB
Description AccuCharge + ModelGauge m5 EZ 1-Cell Charger / Fuel Gauge and Protector
Datasheet download datasheet MAX17335 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1733 Low-Voltage / Step-Down DC-DC Converters in SOT23 Maxim
MAX173 Complete 5s CMOS 10-Bit A/D Converter Maxim
MAX1730 50mA Regulated Step-Down Charge Pump Maxim Integrated
MAX17300 1-Cell ModelGauge m5 EZ Fuel Gauge Maxim Integrated
MAX17301 1-Cell ModelGauge m5 EZ Fuel Gauge Maxim Integrated

Other Datasheets by Analog Devices

Part Number Description
MAX17320 2S-4S ModelGauge m5 EZ Fuel Gauge
MAX17220 nanoPower Synchronous Boost Converters
MAX17221 nanoPower Synchronous Boost Converters
MAX17222 nanoPower Synchronous Boost Converters
MAX17223 nanoPower Synchronous Boost Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE MAX17335 AccuCharge + ModelGauge m5 EZ 1-Cell Charger, Fuel Gauge, and Protector General Description The MAX17335 is a 35μA IQ stand-alone charger, fuel gauge, protector, and battery internal self-discharge detection IC for 1-cell lithium-ion/polymer batteries. When a voltage source is present, the IC regulates charging by modulating the charge N-FET, using AccuCharge™ charger technology. The IC regulates charge voltage, current, and FET temperature. Stand-alone charging is supported by flexible configuration in nonvolatile memory.