Datasheet4U Logo Datasheet4U.com

MAX16165 - 4-Channel Sequencer and Superviso

Description

The MAX16165/MAX16166 monitor up to five voltages and sequence up to four voltages.

These devices provide an adjustable delay as each supply is turned on as well as monitor each power-supply voltage, including the input voltage VDD.

Features

  • 2.7V to 16.0V Wide Operating Voltage Range.
  • Monitor Up to Five Voltages.
  • Sequence Up to Four Voltages.
  • Power-Off in Reverse Order or Simultaneously.
  • Unlimited Daisy-Chain.
  • Capacitor-Adjustable Sequencing Delay.
  • Capacitor-Adjustable Power-Good Timeout.
  • Resistor-Configurable Power-Supply On and Off Thresholds.
  • Open-Drain (MAX16165)/Push-Pull (MAX16166) Outputs.
  • POK Output for System Microcontroller Reset.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1616 Low-Power Linear Regulators Maxim Integrated
MAX161 CMOS 8-Bit 8Channel Data Acquisition System Maxim
MAX1610 Digitally Controlled CCFL Backlight Power Supplies Maxim
MAX1611 Digitally Controlled CCFL Backlight Power Supplies Maxim
MAX1612 Bridge-Battery Backup Controller Maxim

Other Datasheets by Analog Devices

Part Number Description
MAX16166 4-Channel Sequencer and Superviso
MAX16170 High-Voltage Ideal Diode Controller
MAX16491 Step-Down Switching Regulator
MAX12900 Ultra-Low-Power 4-20mA Sensor Transmitter
MAX13487E Half-Duplex RS-485-Compatible Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Highly Integrated, 4-Channel Sequencer and Supervisor MAX16165/MAX16166 General Description The MAX16165/MAX16166 monitor up to five voltages and sequence up to four voltages. These devices provide an adjustable delay as each supply is turned on as well as monitor each power-supply voltage, including the input voltage VDD. The MAX16165/MAX16166 operate from a supply range of 2.7V to 16V and have an internal regulator output (ABP), power internal circuits, and supply more than 1mA additional current to any external circuitry. The sequencing is enabled by two inputs, ON and OFF. A rising edge on the ON input initiates power-on sequencing of the channels whereas a falling edge on OFF input initiates power-off sequencing.
Published: |