LTC7801 Datasheet | Analog Devices

FEATURES n Wide VIN Range: 4V to 140V (150V Abs Max) n Wide Output Voltage Range: 0.8V to 60V n Adjustable Gate Drive Level: 5V to 10V (OPTI-DRIVE) n Low Operating IQ: 40μA (Shutdown = 10μA) n 100% Duty Cycle Operation n Integrated Bootstrap Diode n Selectable Gate Drive UVLO Thresholds n Onboard LDO or External NMOS LDO for DRVCC n EXTVCC LDO Powers Drivers from VOUT n Phase-Lockable Frequency (75k Hz to 850k Hz) n Programmable Fixed Frequency (50k Hz to 900k Hz) n Selectable Continuous, Pulse-Skipping or Low Ripple Burst Mode® Operation at Light Loads n Adjustable Burst Clamp n Power Good Output Voltage Monitor n Programmable Input Overvoltage Lockout n Small 24-Lead 4mm × 5mm QFN or TSSOP Packages APPLICATIONS n Automotive and Industrial Power Systems n High Voltage Battery Operated Systems n Telemunications Power Systems DESCRIPTION The LTC®7801 is a high performance step-down switching regulator DC/DC controller that drives an all N-channel synchronous power MOSFET stage that can operate from input voltages up to 140V. A constant frequency current mode architecture allows a phase-lockable frequency of up to 850k Hz. The gate drive voltage can be programmed from 5V to 10V to allow the use of logic or standard-level FETs to maximize efficiency. An integrated switch in the top gate driver eliminates the need for an external bootstrap diode. An internal charge pump allows for 100% duty cycle operation. The low 40μA no-load quiescent current extends operating run time in battery-powered systems. OPTI-LOOP® pensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. The LTC7801 features a precision 0.8V reference and power good output indicator. The output voltage can be programmed between 0.8V to 60V using external resistors. All registered trademarks and trademarks are the property of their respective owners. Protected by U.S. Patents including 5481178, 5705919, 5929620, 6144194, 6177787, 6580258. TYPICAL...