Datasheet4U Logo Datasheet4U.com

LTC4126 - 7.5mA Wireless Li-Ion Charger

General Description

The LTC®4126 is a low-power wireless single-cell Li-Ion battery charger with an integrated step-down DC/DC regulator.

The step-down regulator is a low-noise multi-mode charge pump which is powered from the battery and provides a regulated 1.2V at the output.

Key Features

  • n Wireless Li-Ion Battery Charger Plus High Efficiency Multi-Mode Charge Pump DC/DC n Wideband Rx Frequency: DC to >10MHz n Integrated Rectifier with Overvoltage Limit n Pin Selectable Charge Voltage: 4.2V or 4.35V n Charge Current: 7.5mA (Fixed) n Low Battery Disconnect: 3.0V n NTC Pin for Temperature Qualified Charging n DC/DC Regulated Output: 1.2V n DC/DC Output Current: Up to 60mA n 50kHz/75kHz Switching, No Audible Noise n Pushbutton and/or Digital on/off Control for DC/DC n Thermally Enha.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LTC4126 7.5mA Wireless Li-Ion Charger with 1.2V Step-Down DC/DC Converter FEATURES n Wireless Li-Ion Battery Charger Plus High Efficiency Multi-Mode Charge Pump DC/DC n Wideband Rx Frequency: DC to >10MHz n Integrated Rectifier with Overvoltage Limit n Pin Selectable Charge Voltage: 4.2V or 4.35V n Charge Current: 7.5mA (Fixed) n Low Battery Disconnect: 3.0V n NTC Pin for Temperature Qualified Charging n DC/DC Regulated Output: 1.