HMC641ALP4E Datasheet | Analog Devices

Data Sheet 0.1 GHz to 20 GHz Ga As, Nonreflective, SP4T Switch Features Broadband frequency range: 0.1 GHz to 20 GHz Nonreflective 50 Ω design Low insertion loss: 3.0 d B at 20 GHz High isolation: 40 d B at 20 GHz High input linearity at 250 MHz to 20 GHz P1d B: 24 d Bm typical IP3: 41 d Bm typical High power handling 26.5 d Bm through path 23 d Bm terminated path Integrated 2 to 4 line decoder 24-lead, 4 mm × 4 mm LFCSP package ESD rating: 250 V (Class 1A) APPLICATIONS Test instrumentation Microwave radios and very small aperture terminals (VSATs) Military radios, radars, and electronic counter measures (ECMs) Broadband telemunications systems FUNCTIONAL BLOCK DIAGRAM GND RF1 GND GND RF2 GND 24 23 22 21 20 19 NIC 1 GND 2 RFC 3 GND 4 NIC 5 NIC 6 50Ω 50Ω 2:4 DECODER 18 NIC 17 GND 16 CTRLA 15 CTRLB 14 VSS 13 NIC 7 8 9 10 11 12 PACKAGE BASE GND RF4 GND GND RF3 GND NIC = NOT INTERNALLY CONNECTED Figure 1. 16094-001 GENERAL DESCRIPTION The HMC641ALP4E is a general-purpose, nonreflective, singlepole, four-throw (SP4T) switch manufactured using a gallium arsenide (Ga As) process. This switch offers high isolation, low insertion loss, and on-chip termination of the isolated ports. The switch operates with a negative supply voltage range of - 5 V to - 3 V and requires two negative logic control voltages. The HMC641ALP4E includes an on-chip, binary 2 to 4 line decoder that provides logic control from two logic input lines. The HMC641ALP4E es in a 4 mm × 4 mm, 24-lead LFCSP package and operates from 0.1 GHz to 20 GHz. Rev. B Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog...