Datasheet4U Logo Datasheet4U.com

HMC129 - GaAs MMIC DOUBLE-BALANCED MIXER

Description

The HMC129 chip is a miniature double-balanced mixer which can be used as an upconverter or downconverter in the 4 to 8 GHz band.

The chip can be integrated directly into hybrid MICs without DC bias or external baluns to provide an extremely compact mixer.

Features

  • Conversion Loss: 7 dB LO to RF and IF Isolation: 40 dB Input IP3: +17 dBm No DC Bias Required Die Size: 1.40 x 1.40 x 0.1 mm General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC1206 High Value Thick Film Chip Resistor Stackpole
HMC121 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR Hittite Microwave Corporation
HMC1210 High Value Thick Film Chip Resistor Stackpole
HMC1001 1- and 2-Axis Magnetic Sensors HONEYWELL
HMC1002 1- and 2-Axis Magnetic Sensors HONEYWELL

Other Datasheets by Analog Devices

Part Number Description
HMC129ALC4 GaAs MMIC DOUBLE-BALANCED MIXER
HMC129G8 GaAs MMIC SMT DOUBLE-BALANCED MIXER
HMC128G8 GaAs MMIC SMT DOUBLE-BALANCED MIXER
HMC1010LP4E RMS POWER DETECTOR
HMC1013LP4E SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
v04.1007 Typical Applications The HMC129 is ideal for: • Microwave & VSAT Radios • Test Equipment • Military EW, ECM, C3I • Space Telecom 4 Functional Diagram HMC129 GaAs MMIC DOUBLE-BALANCED MIXER, 4 - 8 GHz Features Conversion Loss: 7 dB LO to RF and IF Isolation: 40 dB Input IP3: +17 dBm No DC Bias Required Die Size: 1.40 x 1.40 x 0.1 mm General Description The HMC129 chip is a miniature double-balanced mixer which can be used as an upconverter or downconverter in the 4 to 8 GHz band. The chip can be integrated directly into hybrid MICs without DC bias or external baluns to provide an extremely compact mixer. It is ideally suited for applications where small size, no DC bias, and consistent IC performance are required. This mixer can operate over a wide LO drive input of +9 to +15 dBm.
Published: |