Datasheet4U Logo Datasheet4U.com

ADP5092 - Ultralow Power Energy Harvester PMUs

Download the ADP5092 datasheet PDF. This datasheet also covers the ADP5091 variant, as both devices belong to the same ultralow power energy harvester pmus family and are provided as variant models within a single manufacturer datasheet.

Features

  • Boost regulator with maximum power point tracking (MPPT) with dynamic sensing or no sensing mode Hysteresis mode for best ultralight load efficiency Operating quiescent current of SYS pin (VIN > VCBP ≥ VMINOP): 510 nA Sleeping quiescent current of SYS pin (VCBP < VMINOP): 390 nA Input voltage operating range: 0.08 V to 3.3 V Fast cold start from 380 mV (typical) with charge pump Programmable shutdown point on MINOP pin based on the input open circuit voltage (OCV) 150 mA regulated output from 1.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ADP5091-AnalogDevices.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
ADP5100 Pressure sensor Panasonic
ADP5101 Pressure sensor Panasonic
ADP5110 Pressure sensor Panasonic
ADP5111 Pressure sensor Panasonic
ADP5120 Pressure sensor Panasonic

Other Datasheets by Analog Devices

Part Number Description
ADP5090 Ultralow Power Boost Regulator
ADP5091 Ultralow Power Energy Harvester PMUs
ADP5014 Integrated Power
ADP5020 Power Management
ADP5022 600mA Buck Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet Ultralow Power Energy Harvester PMUs with MPPT and Charge Management ADP5091/ADP5092 14145-001 FEATURES Boost regulator with maximum power point tracking (MPPT) with dynamic sensing or no sensing mode Hysteresis mode for best ultralight load efficiency Operating quiescent current of SYS pin (VIN > VCBP ≥ VMINOP): 510 nA Sleeping quiescent current of SYS pin (VCBP < VMINOP): 390 nA Input voltage operating range: 0.08 V to 3.3 V Fast cold start from 380 mV (typical) with charge pump Programmable shutdown point on MINOP pin based on the input open circuit voltage (OCV) 150 mA regulated output from 1.5 V to 3.6 V Battery terminal charging threshold (2.2 V to 5.
Published: |