Datasheet4U Logo Datasheet4U.com

ADP1190 - Integrated 500 mA Load Switch

General Description

The ADP1190 is an integrated high-side load switch with four signal switches, designed for operation from 1.4 V to 3.6 V.

This load switch provides power domain isolation for extended power battery life.

Key Features

  • Low input voltage range: 1.4 V to 3.6 V Power switch: low RDSON of 60 mΩ at 3.6 V, with active discharge 4 normally open SPST signal switches: RDSON of 2 Ω at 1.8 V with active pull-down on one side 500 mA continuous operating current Built-in level shift for control logic that can be operated by 1.2 V logic Ultralow shutdown current:.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet FEATURES Low input voltage range: 1.4 V to 3.6 V Power switch: low RDSON of 60 mΩ at 3.6 V, with active discharge 4 normally open SPST signal switches: RDSON of 2 Ω at 1.8 V with active pull-down on one side 500 mA continuous operating current Built-in level shift for control logic that can be operated by 1.2 V logic Ultralow shutdown current: <0.7 μA Ultrasmall 1.2 mm × 1.6 mm × 0.5 mm, 12-ball, 0.4 mm pitch WLCSP Integrated 500 mA Load Switch with Quad Signal Switch ADP1190 FUNCTIONAL BLOCK DIAGRAM P S1 N T1 P S2 N T2 P S3 N T3 APPLICATIONS Mobile phones SIM card disconnect switches Digital cameras and audio devices Portable and battery-powered equipment P S4 N T4 OFF EN ON 5ms DEBOUNCE 4MΩ GND IN LOAD SWITCH http://www.DataSheet4U.com/ OUT 11259-001 Figure 1.