Datasheet4U Logo Datasheet4U.com

ADM4210 - Hot Swap Controller

Description

The ADM4210 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane.

This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor.

Features

  • Controls supply rails from 2.7 V to 16.5 V Allows protected board removal and insertion to a live backplane External sense resistor provides adjustable analog current limit with circuit breaker Peak fault current limited with fast response Charge pumped gate drive for external N-FET switch Automatic retry or latch-off during current fault Undervoltage lockout Low profile (1 mm), 6-lead, TSOT package Pin compatible with LTC4210-1 and LTC4210-2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADM40N06E N-Channel MOSFET ADV
ADM45N06D N-Channel MOSFET ADV
ADM45N06E N-Channel MOSFET ADV
ADM4N06A N-Channel MOSFET ADV
ADM10-D05 AC / DC CONVERTER REICU

Other Datasheets by Analog Devices

Part Number Description
ADM4073 Current-Sense Amplifier
ADM4168E Dual RS-422 Transceiver
ADM483 Slew-Rate Limited RS-485/RS-422 Transceiver
ADM483E RS-485 Transceiver
ADM485 5V Low Power EIA RS-485 Transceiver

Full PDF Text Transcription

Click to expand full text
Data Sheet FEATURES Controls supply rails from 2.7 V to 16.5 V Allows protected board removal and insertion to a live backplane External sense resistor provides adjustable analog current limit with circuit breaker Peak fault current limited with fast response Charge pumped gate drive for external N-FET switch Automatic retry or latch-off during current fault Undervoltage lockout Low profile (1 mm), 6-lead, TSOT package Pin compatible with LTC4210-1 and LTC4210-2 APPLICATIONS Hot swap board insertion: line cards, raid systems Industrial high-side switches/circuit breakers Electronic circuit breakers GENERAL DESCRIPTION The ADM4210 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane.
Published: |