Datasheet4U Logo Datasheet4U.com

ADM3058E - CAN-FD Transceiver

Description

The ADM3058E is a 5.7 kV rms isolated controller area network (CAN) physical layer transceiver with a high performance, basic feature set.

The ADM3058E fully meets the CAN flexible data rate (CAN FD) ISO 11898-2:2016 requirements and is further capable of supporting data rates as high as 12 Mbps.

Features

  • 5.7 kV rms signal isolated CAN FD transceiver 1500 V peak and dc working voltage to DIN VDE 0884-11 1.7 V to 5.5 V supply and logic side levels 4.5 V to 5.5 V supply on bus side ISO 11898-2:2016-compliant CAN FD Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 155 ns Extended common-mode range: ±25 V Bus fault protection (CANH, CANL): ±40 V ESD protection on the CANH and CANL bus pins ≥±8 kV IEC 61000-4-2 contact discharge ≥±15 kV IEC 61000-4-2 air discharge Passes EN 5502.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADM3-D05 AC / DC CONVERTER REICU
ADM3-D12 AC / DC CONVERTER REICU
ADM3-D15 AC / DC CONVERTER REICU
ADM3-S03 AC / DC CONVERTER REICU
ADM3-S05 AC / DC CONVERTER REICU

Other Datasheets by Analog Devices

Part Number Description
ADM3050E Basic CAN FD Transceiver
ADM3051 High Speed Industrial CAN Transceiver
ADM3052 Isolated CAN Transceiver
ADM3053 Signal and Power Isolated CAN Transceiver
ADM3054 5 kV rms Signal Isolated High Speed CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet 5.7 kV rms, Signal Isolated, High Working Voltage, CAN FD Transceiver with ±15kV IEC ESD ADM3058E FEATURES 5.7 kV rms signal isolated CAN FD transceiver 1500 V peak and dc working voltage to DIN VDE 0884-11 1.7 V to 5.5 V supply and logic side levels 4.5 V to 5.5 V supply on bus side ISO 11898-2:2016-compliant CAN FD Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 155 ns Extended common-mode range: ±25 V Bus fault protection (CANH, CANL): ±40 V ESD protection on the CANH and CANL bus pins ≥±8 kV IEC 61000-4-2 contact discharge ≥±15 kV IEC 61000-4-2 air discharge Passes EN 55022, Class B by 6 dB Safety and regulatory approvals (pending) UL: 5700 V rms for 1-minute per UL 1577 CSA Component Acceptance 5A at 5.
Published: |