Description
The ADM1070 is a negative voltage hot swap controller that allows a board to be safely inserted and removed from a live
48 V backplane.
80 V and can tolerate transient voltages of up to
200 V.
Features
- Allows Safe Board Insertion and Removal from a Live.
- 48 V Backplane Typically Operates from.
- 36 V to.
- 80 V Tolerates Transients up to.
- 200 V (Limited by External
Components) Accurate Programmable Linear Current Limit for
In-Rush Control and Short Circuit Protection Programmable Timeout in Current Limit Limited Consecutive Retry:
Auto-Restart after Current Limit Timeout Shutdown after Seven Consecutive Auto Restarts Provides Immunity from Step Induced Current Spike.
ADM1070_AnalogDevices.pdf
