Datasheet4U Logo Datasheet4U.com

ADL5500 - 100 MHz to 6 GHz TruPwr Detector

General Description

The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz.

It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor.

Key Features

  • True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply RoHS compliant 5 1 OUTPUT (V) 0.1 05546-001.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADL-30V0BTP High Power Red Laser Diode Laser Components
ADL-60V0BTP High Power Red Laser Diode Roithner LaserTechnik
ADL-63102TL-3 AlGaInP Visible Laser Diode Laser Components
ADL-63102TR AlGaInP Visible Laser Diode Laser Components
ADL-63302TL Red Laser Diode Roithner LaserTechnik

Other Datasheets by Analog Devices

Part Number Description
ADL5501 RMS Responding Detector
ADL5502 800 MHz to 3800 MHz Crest Factor Detector
ADL5504 450MHz to 6000MHz TruPwr Detector
ADL5505 450 MHz to 6000Mhz TruPwr Detector
ADL5506 45dB RF Detector

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 100 MHz to 6 GHz TruPwr™ Detector ADL5500 FEATURES True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply RoHS compliant 5 1 OUTPUT (V) 0.1 05546-001 APPLICATIONS Measurement of CDMA2000, W-CDMA, and QPSK-/QAMbased OFDM, and other complex modulation waveforms RF transmitter or receiver power measurement 0.03 –25 –20 –15 –10 –5 0 5 10 15 INPUT (dBm) Figure 1. Output vs. Input Level, Supply 3 V, Frequency 1.