900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Analog Devices Semiconductor Electronic Components Datasheet

AD872A Datasheet

Complete 12-Bit 10 MSPS Monolithic A/D Converter

No Preview Available !

a
FEATURES
Monolithic 12-Bit 10 MSPS A/D Converter
Low Noise: 0.26 LSB RMS Referred-to-Input
No Missing Codes Guaranteed
Differential Nonlinearity Error: 0.5 LSB
Signal-to-Noise and Distortion Ratio: 68 dB
Spurious-Free Dynamic Range: 75 dB
Power Dissipation: 1.03 W
Complete: On-Chip Track-and-Hold Amplifier and
Voltage Reference
Twos Complement Binary Output Data
Out-of-Range Indicator
28-Lead Ceramic DIP or 44-Terminal Leadless Chip
Carrier Package
Complete 12-Bit 10 MSPS
Monolithic A/D Converter
AD872A
VINA
VINB
CLOCK
REF IN
REF OUT
REF GND
FUNCTIONAL BLOCK DIAGRAM
AVDD AGND AVSS
DVDD DGND *DRVDD *DRGND
AD872A
T/H + T/H
+ T/H
+ A/D
A/D DAC
4
+2.5V
REFERENCE
A/D DAC
A/D DAC
4
CORRECTION LOGIC
3
OUTPUT BUFFERS
4
*OEN OTR MSB *MSB BIT2–BIT12
*ONLY AVAILABLE ON 44-TERMINAL SURFACE MOUNT PACKAGE
PRODUCT DESCRIPTION
The AD872A is a monolithic 12-bit, 10 MSPS analog-to-digital
converter with an on-chip, high performance track-and-hold
amplifier and voltage reference. The AD872A uses a multistage
differential pipelined architecture with error correction logic to
provide 12-bit accuracy at 10 MSPS data rates and guarantees
no missing codes over the full operating temperature range. The
AD872A is a redesigned version of the AD872 which has been
optimized for lower noise. The AD872A is pin compatible with
the AD872, allowing the parts to be used interchangeably as sys-
tem requirements change.
The low noise input track-and-hold (T/H) of the AD872A is
ideally suited for high-end imaging applications. In addition, the
T/H’s high input impedance and fast settling characteristics al-
low the AD872A to easily interface with multiplexed systems
that switch multiple signals through a single A/D converter. The
dynamic performance of the T/H also renders the AD872A suit-
able for sampling single channel inputs at frequencies up to and
beyond the Nyquist rate. The AD872A provides both reference
output and reference input pins, allowing the onboard reference
to serve as a system reference. An external reference can also be
chosen to suit the dc accuracy and temperature drift require-
ments of the application. A single clock input is used to control
all internal conversion cycles. The digital output data is pre-
sented in twos complement binary output format. An out-of-
range signal indicates an overflow condition, and can be used
with the most significant bit to determine low or high overflow.
The AD872A is fabricated on Analog Devices’ ABCMOS-l
process that utilizes high speed bipolar and CMOS transistors
on a single chip.
The AD872A is packaged in a 28-lead ceramic DIP and a 44-
terminal leadless ceramic surface mount package (LCC). Opera-
tion is specified from 0°C to +70°C and –55°C to +125°C.
PRODUCT HIGHLIGHTS
The AD872A offers a complete single-chip sampling, 12-bit
10 MSPS analog-to-digital conversion function in a 28-lead DIP
or 44-terminal LCC.
Low Noise—The AD872A features 0.26 LSB rms referred to-
input noise.
Low Power—The AD872A at 1.03 W consumes a fraction of the
power of presently available hybrids.
On-Chip Track-and-Hold (T/H)—The low noise, high imped-
ance T/H input eliminates the need for external buffers and can
be configured for single-ended or differential inputs.
Ease of Use—The AD872A is complete with T/H and voltage
reference and is pin-compatible with the AD872.
Out of Range (OTR)The OTR output bit indicates when the
input signal is beyond the AD872A’s input range.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700 World Wide Web Site: http://www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 1997


Analog Devices Semiconductor Electronic Components Datasheet

AD872A Datasheet

Complete 12-Bit 10 MSPS Monolithic A/D Converter

No Preview Available !

AD872A–SPECIFICATIONS
DC SPECIFICATIONS (TMIN to TMAX, AVDD = + 5 V, DVDD = +5 V, AVSS = –5 V, fSAMPLE = 10 MHz unless otherwise noted)
Parameter
J Grade1
S Grade1 Units
RESOLUTION
12 12 Bits min
MAX CONVERSION RATE
10 10 MHz min
INPUT REFERRED NOISE
0.26 0.26 LSB rms typ
ACCURACY
Integral Nonlinearity (INL)
Differential Nonlinearity (DNL)
No Missing Codes
Zero Error (@ +25°C)2
Gain Error (@ +25°C)2
± 1.75
± 0.5
12
± 0.75
± 1.25
± 1.75
± 0.5
12
± 0.75
± 1.25
LSB typ
LSB typ
Bits Guaranteed
% FSR max
% FSR max
TEMPERATURE DRIFT
Zero Error
Gain Error3, 4
Gain Error3, 5
POWER SUPPLY REJECTION6
AVDD, DVDD (+5 V ± 0.25 V)
AVSS (–5 V ± 0.25 V)
ANALOG INPUT
Input Range
Input Resistance
Input Capacitance
± 0.15
± 0.80
± 0.25
± 0.125
± 0.125
± 1.0
50
10
± 0.3
± 1.75
± 0.50
± 0.125
± 0.125
± 1.0
50
10
% FSR max
% FSR max
% FSR max
% FSR max
% FSR max
V max
ktyp
pF typ
INTERNAL VOLTAGE REFERENCE
Output Voltage
Output Voltage Tolerance
Output Current (Available for External Loads)
(External Load Should Not Change During Conversion)
2.5
± 20
2.0
2.5 V typ
± 40 mV max
2.0 mA typ
REFERENCE INPUT RESISTANCE
5 5 k
POWER SUPPLIES
Supply Voltages
AVDD
AVSS
DVDD
DRVDD7
Supply Current
IAVDD
IAVSS
IDVDD
IDRVDD7
POWER CONSUMPTION
+5 +5 V (± 5% AVDD Operating)
–5 –5 V (± 5% AVSS Operating)
+5 +5 V (± 5% DVDD Operating)
+5 +5 V (± 5% DRVDD Operating)
91 92 mA max (85 mA typ)
147 150 mA max (115 mA typ)
20 21 mA max (7 mA typ)
2 2 mA
1.03 1.03 W typ
1.25 1.3 W max
NOTES
1Temperature ranges are as follows: J Grade: 0°C to +70°C, S Grade: –55°C to +125°C.
2Adjustable to zero with external potentiometers (see Zero and Gain Error Calibration section).
3+25°C to TMIN and +25°C to TMAX.
4Includes internal voltage reference drift.
5Excludes internal voltage reference drift.
6Change in Gain Error as a function of the dc supply voltage (VNOMINAL to VMIN, VNOMINAL to VMAX).
7LCC package only.
Specifications subject to change without notice.
–2– REV. A


Part Number AD872A
Description Complete 12-Bit 10 MSPS Monolithic A/D Converter
Maker Analog Devices
Total Page 20 Pages
PDF Download

AD872A Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 AD872A Complete 12-Bit 10 MSPS Monolithic A/D Converter
Analog Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy