Datasheet4U Logo Datasheet4U.com

AD824 - FET-Input Op Amp

Description

The AD824 is a quad, FET input, single supply amplifier, featuring rail-to-rail outputs.

The combination of FET inputs and rail-to-rail outputs makes the AD824 useful in a wide variety of low voltage applications where low input current is a primary consideration.

Features

  • Single supply operation: 3 V to 30 V Very low input bias current: 2 pA Wide input voltage range Rail-to-rail output swing Low supply current per amplifier: 500 µA Wide bandwidth: 2 MHz Slew rate: 2 V/µs No phase reversal.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AD82010 Mono Filter-less Digital Audio Amplifier ESMT
AD82050 Mono Digital Audio Amplifier ESMT
AD82088 Mono Digital Audio Amplifier ESMT
AD82088D 2x25W Stereo / 1x50W Mono Digital Audio Amplifier ESMT
AD82120 Mono Digital Audio Amplifier ESMT

Other Datasheets by Analog Devices

Part Number Description
AD8240 LED Driver/Monitor
AD8244 Precision FET Input Quad Buffer
AD820 FET Input Op Amp
AD8200 Single Supply Difference Amplifier
AD8202 Single-Supply Difference Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet FEATURES Single supply operation: 3 V to 30 V Very low input bias current: 2 pA Wide input voltage range Rail-to-rail output swing Low supply current per amplifier: 500 µA Wide bandwidth: 2 MHz Slew rate: 2 V/µs No phase reversal APPLICATIONS Photo diode preamplifier Battery powered instrumentation Power supply control and protection Medical instrumentation Remote sensors Low voltage strain gage amplifiers DAC output amplifier GENERAL DESCRIPTION The AD824 is a quad, FET input, single supply amplifier, featuring rail-to-rail outputs. The combination of FET inputs and rail-to-rail outputs makes the AD824 useful in a wide variety of low voltage applications where low input current is a primary consideration.
Published: |