Datasheet4U Logo Datasheet4U.com

AD7884 - LC2MOS 16-Bit High Speed Sampling ADCs

Description

The AD7884/AD7885 is a 16-bit monolithic analog-to-digital converter with internal sample-and-hold and a conversion time of 5.3 µs.

The maximum throughput rate is 166 kSPS.

It uses a two-pass flash architecture to achieve this speed.

Features

  • Monolithic Construction Fast Conversion: 5.3 ␮s High Throughput Rate: 166 kSPS Low Power: 250 mW.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AD7216N2L AC-DC / External Freestanding Adapter Emerson
AD7315 Low Quiescent Current Low Dropout CMOS Voltage Regulator Advanced Corporation Limited
AD7318 Low Quiescent Current Low Dropout CMOS Voltage Regulator Advanced Corporation Limited
AD7325 Low Quiescent Current Low Dropout CMOS Voltage Regulator Advanced Corporation Limited
AD7328 Low Quiescent Current Low Dropout CMOS Voltage Regulator Advanced Corporation Limited

Other Datasheets by Analog Devices

Part Number Description
AD7880 12-Bit Sampling ADC
AD7883 LC2MOS 12-Bit 3.3 V Sampling ADC
AD7885 LC2MOS 16-Bit/ High Speed Sampling ADCs
AD7886 LC2MOS 12-Bit/ 750 kHz/1 MHz/ Sampling ADC
AD7887 +2.7 V to +5.25 V Micropower 2-Channel 125kSPS 12-Bit ADC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
a LC2MOS 16-Bit, High Speed Sampling ADCs AD7884/AD7885 FEATURES Monolithic Construction Fast Conversion: 5.3 ␮s High Throughput Rate: 166 kSPS Low Power: 250 mW APPLICATIONS Automatic Test Equipment Medical Instrumentation Industrial Control Data Acquisition Systems Robotics GENERAL DESCRIPTION The AD7884/AD7885 is a 16-bit monolithic analog-to-digital converter with internal sample-and-hold and a conversion time of 5.3 µs. The maximum throughput rate is 166 kSPS. It uses a two-pass flash architecture to achieve this speed. Two input ranges are available: ± 5 V and ± 3 V. Conversion is initiated by the CONVST signal. The result can be read into a microprocessor using the CS and RD inputs on the device.
Published: |