Datasheet4U Logo Datasheet4U.com

AD71056 - Energy Metering

Description

The AD71056 is a high accuracy, electrical energy metering IC with a precise oscillator circuit that serves as a clock source to the chip.

The AD71056 eliminates the need for an external crystal or resonator, thus reducing the overall cost of building a meter with this IC.

Features

  • On-chip oscillator as clock source High accuracy, supports 50 Hz/60 Hz IEC62053-21 Less than 0.1% error over a dynamic range of 500 to 1 Supplies average real power on frequency outputs (F1, F2) High frequency output (CF) calibrates and supplies instantaneous real power Logic output (REVP) indicates potential miswiring or negative power Direct drive for electromechanical counters and 2-phase stepper motors (F1, F2) Proprietary ADCs and DSP provide high accuracy over large variations in environme.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AD7216N2L AC-DC / External Freestanding Adapter Emerson
AD7315 Low Quiescent Current Low Dropout CMOS Voltage Regulator Advanced Corporation Limited
AD7318 Low Quiescent Current Low Dropout CMOS Voltage Regulator Advanced Corporation Limited
AD7325 Low Quiescent Current Low Dropout CMOS Voltage Regulator Advanced Corporation Limited
AD7328 Low Quiescent Current Low Dropout CMOS Voltage Regulator Advanced Corporation Limited

Other Datasheets by Analog Devices

Part Number Description
AD71028 Dual Digital BTSC Encoder
AD711 BiFET Op Amp
AD7110 Digitally Controlled Audio Attenuator
AD7111 LC2MOS LOGDAC Logarithmic D/A Converter
AD7111A LC2MOS LOGDAC Logarithmic D/A Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Energy Metering IC with Integrated Oscillator and Reverse Polarity Indication AD71056 FEATURES On-chip oscillator as clock source High accuracy, supports 50 Hz/60 Hz IEC62053-21 Less than 0.1% error over a dynamic range of 500 to 1 Supplies average real power on frequency outputs (F1, F2) High frequency output (CF) calibrates and supplies instantaneous real power Logic output (REVP) indicates potential miswiring or negative power Direct drive for electromechanical counters and 2-phase stepper motors (F1, F2) Proprietary ADCs and DSP provide high accuracy over large variations in environmental conditions and time On-chip power supply monitoring On-chip creep protection (no load threshold) On-chip reference 2.
Published: |