Datasheet4U Logo Datasheet4U.com

5962-85514 - VOLT REFERENCE

Download the 5962-85514 datasheet PDF. This datasheet also covers the 5962-8551401VPA variant, as both devices belong to the same volt reference family and are provided as variant models within a single manufacturer datasheet.

Description

Change to military drawing format.

Changes to output adjustment range.

Add conditions for load regulation test at -55°C and +125°C.

Features

  • Maximum total dose available (dose rate = 50.
  • 300 rads(Si)/s) 100 Krads(Si) 3/ 2.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (5962-8551401VPA_AnalogDevices.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
5962-86716 ANALOG SWITCH Intersil
5962-86716012A ANALOG SWITCH Intersil
5962-86716xxxx ANALOG SWITCH Intersil
5962-8688001QA CMOS ARINC Bus Interface Circuit Intersil Corporation
5962-8688001XA CMOS ARINC Bus Interface Circuit Intersil Corporation

Other Datasheets by Analog Devices

Part Number Description
5962-8551401 VOLT REFERENCE
5962-8551401VPA VOLT REFERENCE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com REVISIONS LTR A DESCRIPTION Change to military drawing format. Changes to output adjustment range. Add conditions for load regulation test at -55°C and +125°C. Change group A subgroups for load regulation and line regulation tests, and output voltage temperature coefficient. Add vendor CAGE 64155. Editorial changes throughout. Add vendor CAGE 07933. Add vendor CAGE 54186. Add case outline 2. Change output voltage temperature coefficient test limits. Add device type 02. Editorial changes throughout. Delete vendors CAGEs 54186 and 07933. Add vendor CAGE 1ES66. Add class V devices. Replace CAGE 06665 with 24355. Add case outline H and TABLE IIB. Make changes to 1.2.2 and TABLE II. Add radiation hardness assurance requirements. - ro Make changes to 1.5, table IIA, 4.4.
Published: |