Datasheet4U Logo Datasheet4U.com

ATS477 - Single Phase Hal Efect Latch

Description

ATS477 that integrates Hall sensor with output drivers is designed for electrical commutation of brush-less DC motor application.

Features

  • s - On-chip Hall sensor - Bi-direction H type output drivers for single coil - Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range - High output sinking capability up to 250mA - Operating voltage: 3.5V~20V - Low output switching current noise - Build-in shunt Zener protection for output driver - SOP-7L provide FG output pin - Package: SIP-4L and SOP-7L ATS477.
  • General.

📥 Download Datasheet

Datasheet Details

Part number ATS477
Manufacturer Anachip
File Size 222.69 KB
Description Single Phase Hal Efect Latch
Datasheet download datasheet ATS477 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ATS45C LOW-VOLTAGE ULTRA-LOW-POWER TEMPERATURE SENSOR Andiglog
ATS48D75Y soft starter Schneider
ATS-1 (ATS-1/-2) Crystals MTRONPTI
ATS-2 (ATS-1/-2) Crystals MTRONPTI
ATS-25 Crystal Unit ETC

Other Datasheets by Anachip

Part Number Description
ATS137 Single Hall Effect Switch
ATS177 Single Output Hall Effect Latch
ATS278 Two Phase Hall Effect Latch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com ATC Single Phase Hall Effect Latch „ Features - On-chip Hall sensor - Bi-direction H type output drivers for single coil - Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range - High output sinking capability up to 250mA - Operating voltage: 3.5V~20V - Low output switching current noise - Build-in shunt Zener protection for output driver - SOP-7L provide FG output pin - Package: SIP-4L and SOP-7L ATS477 „ General Description ATS477 that integrates Hall sensor with output drivers is designed for electrical commutation of brush-less DC motor application.
Published: |