Datasheet4U Logo Datasheet4U.com

AP1603 - Step-Up DC/DC Converter

Description

The AP1603 is a high efficiency step-up DC/DC converter for applications using 1 to 2 NiMH battery cells.

Only three external components are required to deliver a fixed output voltage of 3.3V.

The AP1603 starts up from less than 0.9V input with 1mA load.

Features

  • s -A Guaranteed Start-Up from less than 0.9 V. -High Efficiency. -Low Quiescent Current. -Less Number of External Components needed. -Low Ripple and Low Noise. -Space Saving Pb-Free Packages: SOT23-6.
  • General.

📥 Download Datasheet

Datasheet Details

Part number AP1603
Manufacturer Anachip
File Size 170.09 KB
Description Step-Up DC/DC Converter
Datasheet download datasheet AP1603 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP1603 STEP-UP DC/DC CONVERTER Diodes Incorporated
AP160 8-BIT MICROCONTROLLER WITH 8KB OTP AMIC Technology
AP1601 STEP-UP DC/DC CONVERTER Diodes
AP1604A PWM/PFM DUAL MODE STEP-DOWN DC/DC CONVERTER Diodes Incorporated
AP1605 PWM/PFM DUAL-MODE STEP-DOWN SWITCHING REGULATOR Diodes Incorporated

Other Datasheets by Anachip

Part Number Description
AP1604 PWM/PFM Dual Mode Step-down DC/DC Converter
AP1605 PWM/PFM Dual-mode Step-Down Switching Regulator
AP1609 PWM/PFM Dual Mode Step-up DC/DC Converter
AP1623 PWM Control Step-Down Switching Regulator-Converter
AP1624 PWM/PFM Dual Mode Step-up DC/DC Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP1603 Step-Up DC/DC Converter „ Features -A Guaranteed Start-Up from less than 0.9 V. -High Efficiency. -Low Quiescent Current. -Less Number of External Components needed. -Low Ripple and Low Noise. -Space Saving Pb-Free Packages: SOT23-6 „ General Description The AP1603 is a high efficiency step-up DC/DC converter for applications using 1 to 2 NiMH battery cells. Only three external components are required to deliver a fixed output voltage of 3.3V. The AP1603 starts up from less than 0.9V input with 1mA load. Pulse Frequency Modulation scheme brings optimized performance for applications with light output loading and low input voltages. The output ripple and noise are lower compared with the circuits operating in PSM mode. The PFM control circuit operating in 150KHz (max.
Published: |