Datasheet4U Logo Datasheet4U.com

AOZ7100QI - USB Type-C and USB PD Source Controller

General Description

The AOZ7100 is a USB Type-C controller that supports to Power Delivery 2.0/3.0.

It has a built-in 32-bit MCU, GPIOs, I2C interface and 10bits ADC unit for fulfilling power control and protection on charger and adapter applications.

It is available in 28-pin WQFN package.

Key Features

  • Support USB PD 2.0/3.0 via CC1 & CC2 pins.
  • Support BC 1.2 via DP & DM pins.
  • Discharge MOS control and cold-socket detection.
  • CC1/CC2 with high noise immunity.
  • Support over voltage detection for CC1/CC2.
  • Support external NTC over temperature Detection.
  • Support under voltage protection (UVP).
  • One high accuracy 10bit-SAR ADC for Voltage and low-side Current monitors.
  • Built-in 32-bit MCU.
  • Built-in 16 KB SRAM.
  • Built-in 32 KB EEPROM.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AOZ1015 EZBuck 1.5A Synchronous Buck Regulator Alpha and Omega Semiconductors
AOZ1017 EZBuck 3A Simple Regulator Alpha and Omega Semiconductors
AOZ1018 EZBuck 2A Simple Regulator Alpha and Omega Semiconductors
AOZ1019 EZBuck 2A Simple Regulator Alpha and Omega Semiconductors
AOZ1020 2A Synchronous Buck Regulator Alpha and Omega Semiconductors

Other Datasheets by Alpha & Omega Semiconductors

Part Number Description
AOZ7111 Critical Conduction Mode PFC Controller
AOZ7000 Coreless Pulse Transformer
AOZ7200CI 600V N-channel MOSFET
AOZ7203AV Zero Bridge Loss AlphaZBL Controller
AOZ7270DI 600V Ideal Diode

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AOZ7100QI USB Type-C and USB PD Source Controller General Description The AOZ7100 is a USB Type-C controller that supports to Power Delivery 2.0/3.0. It has a built-in 32-bit MCU, GPIOs, I2C interface and 10bits ADC unit for fulfilling power control and protection on charger and adapter applications. It is available in 28-pin WQFN package. Features  Support USB PD 2.0/3.0 via CC1 & CC2 pins  Support BC 1.