Datasheet4U Logo Datasheet4U.com

AOZ1977-1 - High Voltage LED Driver IC

Description

The AOZ1977-1 is a high-efficiency LED driver controller for high voltage LED backlighting applications.

It is designed to drive high-brightness LED light bar in LED TV applications.

The AOZ1977-1 can support a wide range of input and output voltages.

Features

  • to protect the regulator under fault conditions. A control pin can disable an external switch to disconnect the LEDs current path from the output in PWM dimming or under catastrophic failure conditions. Cycle-by-cycle current protection limits the peak inductor current. Thermal shutdown provides another level of protection. Low feedback voltage (500mV) helps reduce power loss. The AOZ1977-1 features sync function to allow for synchronization with external clock or multiple AOZ1977-1. The AOZ1977.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AOZ1015 EZBuck 1.5A Synchronous Buck Regulator Alpha and Omega Semiconductors
AOZ1017 EZBuck 3A Simple Regulator Alpha and Omega Semiconductors
AOZ1018 EZBuck 2A Simple Regulator Alpha and Omega Semiconductors
AOZ1019 EZBuck 2A Simple Regulator Alpha and Omega Semiconductors
AOZ1020 2A Synchronous Buck Regulator Alpha and Omega Semiconductors

Other Datasheets by Alpha & Omega Semiconductors

Part Number Description
AOZ1977 High Voltage LED Driver IC
AOZ1978 Dual Channel High Voltage LED Driver IC
AOZ1905 EZBoost 2A General Purpose Regulator
AOZ1915 1.5A General Purpose Boost Regulator
AOZ1934 High Efficiency Boost 20- or 30- LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AOZ1977-1 High Voltage LED Driver IC General Description The AOZ1977-1 is a high-efficiency LED driver controller for high voltage LED backlighting applications. It is designed to drive high-brightness LED light bar in LED TV applications. The AOZ1977-1 can support a wide range of input and output voltages. The input bias voltage of AOZ1977-1 is from 8V to 30V. The AOZ1977-1 has multiple features to protect the regulator under fault conditions. A control pin can disable an external switch to disconnect the LEDs current path from the output in PWM dimming or under catastrophic failure conditions. Cycle-by-cycle current protection limits the peak inductor current. Thermal shutdown provides another level of protection. Low feedback voltage (500mV) helps reduce power loss.