APS12170
FEATURES
AND BENEFITS
- Symmetrical latch switch points
- Automotive-grade ruggedness and fault tolerance
- Extended AEC-Q100 Grade 0 qualification
- Reverse-battery and 40 V load dump protection
- Operation from
- 40°C to 175°C junction temperature
- High EMC immunity, ±12 k V HBM ESD
- Undervoltage lockout
- Overvoltage clamping protection
- Resistant to physical stress
- Operation from unregulated supplies, 3.8 to 16 V
- Continuous-time operation
- Fast power-on time
- Low EMI emissions
- Low latency
- Regulator stability without a bypass capacitor
- Current mode output- voltage controlled
- Solid-state reliability
- Industry-standard packages and pinouts
PACKAGES:
Not to scale
3-pin SOT23W (suffix LH)
3-pin SIP (suffix UA)
DESCRIPTION
The APS12170 is a two-wire, planar Hall-effect sensor integrated circuit (IC) operating under a continuous-time sensing architecture. The devices are extremely fast responding with lower levels of emissions (EMI) than a design using chopper...
