Datasheet4U Logo Datasheet4U.com

A8514 - High Efficiency Fault Tolerant LED Driver

General Description

The A8514 is a multi-output white LED driver for small-size LCD backlighting.

It integrates a current-mode boost converter with internal power switch and four current sinks.

The boost converter can drive up to 48 LEDs, 12 LEDs per string, at 80 mA.

Key Features

  • AEC-Q100 qualified.
  • Wide input voltage range of 5 to 40 V for start/stop, cold crank and load dump requirements.
  • Fully integrated LED current sinks and boost converter with 60 V DMOS.
  • Sync function to synchronize boost converter switching frequency up to 2.3 MHz, allowing operation above the AM band.
  • Excellent input voltage transient response.
  • Single resistor primary OVP minimizes VOUT leakage.
  • Internal secondary OVP for redundant p.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A8512 LED Backlight Driver Allegro Micro Systems
A8500 Flexible WLED/RGB Backlight Driver Allegro MicroSystems
A8501 4 Channel x 100 mA WLED/RGB Driver Allegro MicroSystems
A8501 PWM CONTROL STEP-UP DC-DC CONVERTER AiT Semiconductor
A8520E24A91 Anaren Integrated Radio Anaren

Other Datasheets by Allegro MicroSystems

Part Number Description
A8510 High Efficiency Fault Tolerant LED Driver
A8511 4-Channel x 150 mA WLED/RGB Driver
A8515 Fault Tolerant LED Driver
A8517 Multi-Channel LED Driver
A8518 Fault-Tolerant LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A8514 Wide Input Voltage Range, High Efficiency Fault Tolerant LED Driver FEATURES AND BENEFITS • AEC-Q100 qualified • Wide input voltage range of 5 to 40 V for start/stop, cold crank and load dump requirements • Fully integrated LED current sinks and boost converter with 60 V DMOS • Sync function to synchronize boost converter switching frequency up to 2.3 MHz, allowing operation above the AM band • Excellent input voltage transient response • Single resistor primary OVP minimizes VOUT leakage • Internal secondary OVP for redundant protection • LED current of 80 mA per channel • Drives up to 12 series LEDs in 4 parallel strings • 0.7% to 0.