A1142 Datasheet | Allegro MicroSystems

A1140, A1142, and A1143 Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches Features and Benefits - Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress - Factory programmed at end-of-line for optimized switchpoints - On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator ▫ 3.5 to 24 V operation Packages: 3 pin SOT23W (suffix LH), and 3 pin SIP (suffix UA) Description The A1140, A1142, and A1143 devices are sensitive, two-wire, unipolar, Hall effect switches that are factory-programmed at end-of-line to optimize magnetic switchpoint accuracy. These devices use a high frequency chopper-stabilization technique, produced using the Allegro advanced Bi CMOS wafer fabrication process, to achieve magnetic stability and to eliminate offset inherent in single-element devices exposed to harsh application environments. monly found in a number of...