AT1380A - Switching Regulator Controller

Product Overview

Aimtron Technology

Part number	AT1380A
Manufacturer	Aimtron Technology
File Size	328.37 KB
Description	Switching Regulator Controller
Datasheet	AT1380A Datasheet
Additional preview pages of the AT1380A datasheet.

The AT1380A is a single-channel PWM control IC for DC/DC conversion with soft start function and short circuit detection.

Adjustable soft start is programmed with an external capacitor on SCP pin.

The AT1380A is ideal for up, down and flyback conversion.

LCD Displays

2.5 to 15 V supply voltage operating range.
Low current consumption: 6 mA in operation, 1 µA or less in stand-by.
20 kHz to 1 MHz operation frequency range.
Provides a fixed output current with minimal supply voltage fluctuations by using an external resistor to set the output current.
Totem-pole output.
Built-in soft start circuit.
Built-in timer-latch short circuit detection and protection circuit (SCP). General.

📁 Similar Datasheet

AT1380A - Switching Regulator Controller (Global Mixed-mode Technology)
AT1303 - MICROPOWER STEP UP DC/DC CONVERTER (ETC)
AT1308 - Micro-Power Step up DC-DC Converter (ETC)
AT1308A - Micro-Power Step up DC-DC Converter (Global Mixed-mode Technology)
AT1316A - Constant Current 20V White LEDs Driver (Global Mixed-mode Technology)
AT1358 - 1A Synchronous Buck Converter (Global Mixed-mode Technology)
AT1362A - Synchronous Buck Converter (Global Mixed-mode Technology)
AT1362B - Synchronous Buck Converter (Global Mixed-mode Technology)

Other Datasheets by Aimtron Technology

Published: Jul 18, 2018 |