Datasheet4U Logo Datasheet4U.com

A4057 - LINEAR LI-ION BATTERY CHARGER

Description

A4057 series is a double lithium battery charge management chip.

The chip includes a charge state detection, the charging process, temperature detection and so on.

The chip also integrates a high-precision reference voltage module in it.

Features

  • Double lithium battery charge management.
  • Only need a few external components.
  • Pre-charge, constant current charging , constant voltage charging mode.
  • Temperature detection.
  • Two charging status.
  • Available in SOP8 Package.

📥 Download Datasheet

Datasheet Details

Part number A4057
Manufacturer AiT Semiconductor
File Size 436.69 KB
Description LINEAR LI-ION BATTERY CHARGER
Datasheet download datasheet A4057 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A40 Acorn Valves MAZDA
A4003C 3CH Power Management IC AEROSEMI
A4011 1000 TO 4000 MHz TO-8 CASCADABLE AMPLIFIER Tyco Electronics
A4011 Cascadable Amplifier MA-COM
A4012 1.0 TO 4.0 GHz TO-8 CASCADABLE AMPLIFIER Tyco Electronics

Other Datasheets by AiT Semiconductor

Part Number Description
A4051 1A LINEAR LI-ION BATTERY CHARGER
A4053 1A LINEAR LI-ION BATTERY CHARGER
A4054A 800mA STANDALONE LINEAR Li-ion BATTERY CHARGER
A4055 800mA STANDALONE LINEAR LI-ION BATTERY CHARGER
A4001 ONE CELL LITHIUM-ION/POLYMER BATTERY PROTECTION

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AiT Semiconductor Inc. www.ait-ic.com A4057 BATTERY MANAGEMENT LINEAR LI-ION BATTERY CHARGER DESCRIPTION A4057 series is a double lithium battery charge management chip. The chip includes a charge state detection, the charging process, temperature detection and so on. The chip also integrates a high-precision reference voltage module in it. A4057 charge contains three modes: precharge, constant current charging, constant voltage charging. Constant current charging current is five times the pre-charge current; when the voltage is lower than 6.5V into the precharge mode; when the voltage is above 6.5V into the constant current charge mode, the charging current is five times as the precharge, the charging current is determined by an external resistor.
Published: |