Outline Drawing
.016±.002
0.41±0.05
.016±.002
0.41±0.05
.006±.001
0.15±0.03
CD914, CD4148, CD4531, CD6642, CD3600,
CD4150, CD6640, CD4153 & CD4454
DESIGN DATA
METALLIZATION:
AL THICKNESS:
GOLD THICKNESS:
CHIP THICKNESS:
Top: (Anode)
Back: (Cathode)
25,000 Å Minimum
4,000 Å Minimum
10 Mils
Al
Au
.010±.002
0.25±0.05
Graphs
Aeroflex / Metelics, Inc.
975 Stewart Drive,
Sunnyvale, CA 94085
Tel: (408) 737-8181
Fax: (408) 733-7645
54 Grenier Field Road,
Londonderry, NH 03053
Tel: (603) 641-3800
Fax: (603)-641-3500
Sales: 888-641-SEMI (7364)
Hi-Rel Components
9 Hampshire Street,
Lawrence, MA 01840
Tel: (603) 641-3800
Fax: (978) 683-3264
www.aeroflex.com/metelics-hirelcomponents
ISO 9001: 2008 certified companies
www.aeroflex.com/metelics metelics-sales@aeroflex.com
Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services
herein at any time without notice. Consult Aeroflex or an authorized sales representative to
verify that the information in this data sheet is current before using this product. Aeroflex
does not assume any responsibility or liability arising out of the application or use of any
product or service described herein, except as expressly agreed to in writing by Aeroflex;
nor does the purchase, lease, or use of a product or service from Aeroflex convey a license
under any patent rights, copyrights, trademark rights, or any other of the intellectual rights
of Aeroflex or of third parties.
Copyright 2009 Aeroflex / Metelics. All rights reserved.
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Revision Date: 12/14/2011