PCL-818HG Datasheet | Advantech

PCL-818HD/HG PCL-818L Features - Programmable gain 100 k S/s, 12-bit, 16-ch ISA Multifunction Card 40 k S/s, 12-bit, 16-ch ISA Multifunction Card - 16-ch single-ended or 8-ch differential analog input - 12-bit A/D converter, with up to 100 k Hz sampling rate - Automatic channel/gain scanning - Onboard FIFO memory (1,024 samples, PCL-818HD/HG only) - One 12-bit analog output channel - 16-ch digital input and 16-ch digital output - Onboard programmable counter Ro HS 2002/95/EC PLIANT Introduction The PCL-818L series was designed for entry-level models to the PCL-818 series. The cards have been designed with the cost-sensitive customer in mind, but still offers the same functions as the rest of the series, except that they have a 40 k Hz sampling rate and only accepts bipolar inputs. They are fully software and connector patible with the PCL-818HD and PCL-818HG. This lets you upgrade your applications to these higher performance cards without hardware or software changes. The PCL-818LS bundle consists of the PCL-818L card, the PCLD-8115 wiring terminal board and a DB37 cable assembly. The PCLD-8115 acmodates onboard passive signal conditioning ponents (resistors and capacitors), allowing you to easily implement a low-pass filter, a voltage attenuator or a 4 ~ 20 m A voltage converter. Specifications Analog Input - Channels - Resolution - Max. Sampling Rate - - - - - 16 single-ended / 8 differential 12 bits 100 k S/s for all input ranges (PCL-818HD/HG only) 40 k S/s for all input ranges (PCL-818L only) FIFO Size 1,024 samples Overvoltage Protection 30 Vp-p Input Impedance 10 MW Sampling Modes Software, pacer or external (V, software programmable) Input Range ±10 N/A 0.1 ±5 0 ~ 10 0.1 ±2.5 0~5 0.2 ±1.25 0 ~ 2.5 0.2 ±0.625 0 ~ 1.25 0.4 Digital Input - Channels - patibility - Input Voltage 16 5 V/TTL Logic 0: 0.8 V max. Logic 1: 2.0 V min. Digital...