Datasheet4U Logo Datasheet4U.com

AMS2596 - 3A 30V Step-Down Converter

Datasheet Summary

Description

The AMS2596 is a high efficiency, non-synchronous step down regulator delivering up to 3A of output current making it ideal for medium to heavy load applications.

It is designed to operate with wide input voltage range of 4.5 to 30V while maintaining 1mA of supply current at no load.

Features

  • VIN range: 4.5 - 30V.
  • VOUT range: 1.25V to 7V fixed output Voltage in 100mV steps.
  • Adjustable version output voltage range from 1.2V to 25V.
  • Up to 5A output current.
  • 150kHz switching frequency.
  • 900µA supply current.
  • 80uA standby quiescent current.
  • 100% Duty Cycle.
  • Excellent line and load regulation.
  • Internal Soft Start.
  • Internal compensation.
  • Under voltage lockout.
  • Current Limit.

📥 Download Datasheet

Datasheet preview – AMS2596

Datasheet Details

Part number AMS2596
Manufacturer Advanced Monolithic Systems
File Size 751.45 KB
Description 3A 30V Step-Down Converter
Datasheet download datasheet AMS2596 Datasheet
Additional preview pages of the AMS2596 datasheet.

📁 Similar Datasheet

  • AMS22B - Non-Contacting Analog Rotary Position Sensor (BOURNS)
  • AMS22S - Non-Contacting Analog Rotary Position Sensor (Bourns Electronic Solutions)
  • AMS22U - Non-Contacting Analog Rotary Position Sensor (Bourns Electronic Solutions)
  • AMS2710 - PCB pressure sensor (Analog Microelectronics)
  • AMS2712 - PCB pressure sensor (Analog Microelectronics)
  • AMS-117 - Low Noise Amplifier (MA-COM)
  • AMS-162 - Low Noise Amplifier (MA-COM)
  • AMS0026 - N-CH100V Fast Switching MOSFETs (axelite)
  • AMS104 - (AMSxxxx) Light Sensor (Panasonic)
  • AMS104T - (AMSxxxT) Light Sensor (Panasonic)
Other Datasheets by Advanced Monolithic Systems
  • AMS2501 - 1A VERY LOW DROPOUT VOLTAGE REGULATORS
  • AMS2502 - 1A VERY LOW DROPOUT VOLTAGE REGULATORS
  • AMS255 - MICROPOWER SHUNT VOLTAGE REFERENCE
  • AMS2566 - PWM buck DC/DC converter
  • AMS2576 - step-down switching regulators
  • AMS2026 - DUAL POWER DISTRIBUTION SWITCH
  • AMS2027 - SINGLE POWER DISTRIBUTION SWITCH
  • AMS2115 - FAST TRANSIENT RESPONSE LOW DROPOUT REGULATOR

Full PDF Text Transcription

Click to expand full text
General Description The AMS2596 is a high efficiency, non-synchronous step down regulator delivering up to 3A of output current making it ideal for medium to heavy load applications. It is designed to operate with wide input voltage range of 4.5 to 30V while maintaining 1mA of supply current at no load. The output voltage is either factor programmed or set via two external resistors to as low as 1.23V. The regulator operates at fixed 150kHz switching frequency ensuring low output ripple across the entire load. It requires only four external components for minimum PCB footprint and lowest overall system cost. An independent Enable pin provides electrical On/Off of the regulator. When connected to logic high, the regulator shuts down and consumes less than 100µA of current.
Published: |