29F010 Datasheet | Advanced Micro Devices

FINAL Am29F010 1 Megabit (128 K x 8-bit) CMOS 5.0 Volt-only, Uniform Sector Flash Memory DISTINCTIVE CHARACTERISTICS s Single power supply operation - 5.0 V ± 10% for read, erase, and program operations - Simplifies system-level power requirements s High performance - 45 ns maximum access time s Low power consumption - 30 mA max active read current - 50 mA max program/erase current - <25 µA typical standby current s Flexible sector architecture - Eight uniform sectors - Any bination of sectors can be erased - Supports full chip erase s Sector protection - Hardware-based feature that disables/reenables program and erase operations in any bination of sectors - Sector protection/unprotection can be implemented using standard PROM programming equipment s Embedded Algorithms - Embedded Erase algorithm automatically pre-programs and erases the chip or any bination of designated sector - Embedded Program algorithm automatically programs and verifies data at specified address s Minimum 100,000 program/erase cycles guaranteed s Package options - 32-pin PLCC - 32-pin TSOP - 32-pin PDIP s patible with JEDEC standards - Pinout and software patible with single-power-supply flash - Superior inadvertent write protection s Data# Polling and Toggle Bits - Provides a software method of detecting program or erase cycle pletion Publication# 16736 Rev: G Amendment/+2 Issue Date: March 1998 GENERAL DESCRIPTION The Am29F010 is a 1 Mbit, 5.0 Volt-only Flash memory organized as 131,072 bytes. The Am29F010 is offered in 32-pin PLCC, TSOP, and PDIP packages. The bytewide data appears on DQ0-DQ7. The device is designed to be programmed in-system with the standard system 5.0 Volt VCC supply. A 12.0 volt VPP is not required for program or erase operations. The device can also...