ABB0203 - Low Skew Output Buffer

Description

The ABB0203 is a high performance, low skew, low jitter zero delay buffer designed to distribute high speed clocks and is available in an 8-pin SOIC package.

It has four outputs that are synchronized with the input.

The synchronization is established via CLKOUT feed back to the input of the PLL.

Features

Frequency range 75 ~ 180MHz. Internal phase locked loop will allow spread spectrum modulation on reference clock to pass to the outputs (up to 100kHz SST modulation). Zero input - output delay. Less than 700 ps device - device skew. Less than 250 ps skew between outputs. Less than 150 ps cycle - cycle jitter. Output Enable function tri-state outputs. 3.3V operation. Available in 8-Pin 150mil SOIC. PIN CONF.

Abracon Corporation

📥 Download Datasheet

Datasheet Details

Part number	ABB0203
Manufacturer	Abracon Corporation
File Size	77.65 KB
Description	Low Skew Output Buffer
Datasheet	ABB0203 Datasheet
Additional preview pages of the ABB0203 datasheet.

📁 Similar Datasheet

Other Datasheets by Abracon Corporation

ABB0204 - Low Skew Output Buffer
ABB0205 - Low Skew Output Buffer
ABB3007 - High Speed Translator Buffer to CMOS

Full PDF Text Transcription

Click to expand full text

ABB0203 Low Skew Output Buffer www.DataSheet4U.com FEATURES • • • • • • • • • Frequency range 75 ~ 180MHz. Internal phase locked loop will allow spread spectrum modulation on reference clock to pass to the outputs (up to 100kHz SST modulation). Zero input - output delay. Less than 700 ps device - device skew. Less than 250 ps skew between outputs. Less than 150 ps cycle - cycle jitter. Output Enable function tri-state outputs. 3.3V operation. Available in 8-Pin 150mil SOIC. PIN CONFIGURATION REF CLK2 CLK1 GND 1 8 CLKOUT CLK4 VDD CLK3 ABB0203 2 3 4 7 6 5 Remark If REF clock is stopped for more than 10us after it has already been provided to the chip, and after power-up, the output clocks will disappear.

Published: Feb 13, 2011 |