Avago Technologies’ AMMP-6222 is an easy-to-use broadband, high gain, high linearity Low Noise Amplifier in a surface mount package.
The wide band and unconditionally stable performance makes this MMIC ideal as a primary or sub-sequential low noise block or a transmitter or LO driver.
Key Features
Surface Mount Package, 5.0 x 5.0 x 1.25 mm Single Positive Bias Pin Selectable Output Power / Linearity No Negative Gate Bias
Specifications (Vdd = 4.0V, Idd = 120mA)
RF Frequencies: 7 - 21 GHz High Output IP3: 29dBm High Small-Signal Gain: 24dB Typical Noise Figure: 2.3dB Input, Output Match: -10dB.
Full PDF Text Transcription for AMMP-6222 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
AMMP-6222. For precise diagrams, and layout, please refer to the original PDF.
AMMP-6222 7 to 21 GHz GaAs High Linearity LNA in SMT Package www.DataSheet4U.com Data Sheet Description Avago Technologies’ AMMP-6222 is an easy-to-use broadband, high ga...
View more extracted text
ion Avago Technologies’ AMMP-6222 is an easy-to-use broadband, high gain, high linearity Low Noise Amplifier in a surface mount package. The wide band and unconditionally stable performance makes this MMIC ideal as a primary or sub-sequential low noise block or a transmitter or LO driver. The MMIC has 3 gain stages and a selectable pin to switch between low and high current, corresponding with low and high output power and linearity. In the high current, high output power state, it requires a 4V, 120mA supply. In the low current, low output power state, the supply is reduced to 4V, 95mA.
AMMP-6222 Datasheet
