AMMP-6130 Datasheet | AVAGO TECHNOLOGIES

30 GHz Power Amplifier with Frequency Multiplier (x2) in SMT Package .. Data Sheet Description Avago Technologies AMMP-6130 is a high gain, narrowband doubler and output power amplifier designed for DBS applications and other mercial munication systems. The MMIC takes an input 15 GHz signal and passes it through a harmonic frequency multiplier (x2) and then three stages of power amplification. Integrated matching structures filter and match input/output to 50 Ω. It has integrated input and output DC blocking capacitors and bias structures to all stages. The MMIC is fabricated using PHEMT technology. The backside of this package part is both RF and DC ground. This helps simply the assembly process and reduces assembly related performance variations and costs. The surface mount package allows elimination of “chip & wire” assembly for lower cost. This MMIC is a cost effective alternative to hybrid (discrete-FET) amplifiers that require plex tuning and assembly process. Features - - - - - - - - - - 5x5 mm Surface Mount Package Integrated DC Block and Choke 50 Ω Input and Output Match Single Positive Supply Pin No Negative Gate Bias Specifications (Vd=4.5V, Idd=200m A) Frequency Range 15GHz in, 30GHz out Output Power: 21 d Bm Harmonic Suppression: 60d Bc Single Positive Supply DC Requirements: 4.5V, 200m A Applications - Microwave Radio systems - Satellite VSAT, DBS Up/Down Link - Broadband Wireless Access) Surface Mount Package, 5.0 x 5.0 x 1.25 mm Pin Connections (Top View) 1 2 X2 Pin 1 2 3 4 5 6 7 8 Function Vd RF Out RF In PACKAGE BASE GND Note: These devices are ESD sensitive. The following precautions are strongly remended. Ensure that an ESD approved carrier is used when units are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices. The manufacturer assumes no responsibilities for ESD damage due to improper storage and handling of...