Datasheet4U Logo Datasheet4U.com

AMMP-6442 - 1W Linear Power Amplifier

Description

The AMMP-6442 MMIC is a 1W linear power amplifier in a surface mount package designed for use in transmitters that operate  at frequencies between 37GHz and 40GHz.

In the operational band, it provides 30dBm of output power (P-1dB) and 23dB of small-signal gain.

Features

  • 5x5mm SMT package.
  • 1 watt output power.
  • 50 Ω match on input and output.
  • ESD protection (50V MM, and 250V HBM) Typical Performance (Vdd = 5V, Id(q) = 0.7A).
  • Frequency range 37 to 40 GHz.
  • Small signal Gain of 23dB (Typ. ).
  • Output power @P-1 of 30dBm (Typ. ).
  • Input and Output return losses -8dB.
  • OIP3 of 35dBm @Po=18dBm (scl) Functional Block Diagram 12 3 Pin Function 1 Vd1 2 Vd2 3 Vd3 4 RF OUT 8 4 5 Vd3 6.

📥 Download Datasheet

Datasheet preview – AMMP-6442

Datasheet Details

Part number AMMP-6442
Manufacturer AVAGO
File Size 189.48 KB
Description 1W Linear Power Amplifier
Datasheet download datasheet AMMP-6442 Datasheet
Additional preview pages of the AMMP-6442 datasheet.

📁 Similar Datasheet

  • AMMP-6408 - 6 to 18 GHz 1 W Power Amplifer (AVAGO TECHNOLOGIES)
  • AMMP-6420 - 6-18 GHz 1W Power Amplifier (Agilent Technologies)
  • AMMP-6425 - 18-28 GHz 1W Power Amplifier (AVAGO TECHNOLOGIES)
  • AMMP-6430 - 27-32GHz0.5W Power Amplifier (AVAGO TECHNOLOGIES)
  • AMMP-6130 - 30 GHz Power Amplifier with Frequency Multiplier (AVAGO TECHNOLOGIES)
  • AMMP-6220 - 6-20 GHz Low Noise Amplifer (AVAGO TECHNOLOGIES)
  • AMMP-6220 - 6-20 GHz Low Noise Amplifer (Agilent Technologies)
  • AMMP-6222 - 7 to 21 GHz GaAs High Linearity LNA (AVAGO TECHNOLOGIES)
  • AMMP-6232 - 18 to 32 GHz GaAs High Linearity LNA (AVAGO TECHNOLOGIES)
  • AMMP-6233 - 18 to 32 GHz GaAs Low Noise Amplifer (AVAGO TECHNOLOGIES)
Other Datasheets by AVAGO

Full PDF Text Transcription

Click to expand full text
AMMP-6442 37- 40 GHz, 1W Linear Power Amplifier in SMT Package Data Sheet Description The AMMP-6442 MMIC is a 1W linear power amplifier in a surface mount package designed for use in transmitters that operate  at frequencies between 37GHz and 40GHz.  In the operational band, it provides 30dBm of output power (P-1dB) and 23dB of small-signal gain. This PA is also designed for high linear applications with typical performance of 36dBm OIP3 at 18dBm SCL output. Applications • Point-to-Point Radio Systems • mmW Communications Package Diagram Vd1 Vd2 Vd3 1 23 RF IN 8 GND 4 RF OUT 765 Vg1 Vg2 Vd3 Note: 1. This MMIC uses depletion mode pHEMT devices. Negative supply is used for DC gate biasing.
Published: |