Datasheet4U Logo Datasheet4U.com

AMMP-6231 - 18 to 32 GHz GaAs Low Noise Amplifier

Description

Avago Technologies AMMP-6231 is a high gain, low-noise amplifier that operates from 18 GHz to 32 GHz.

It has a 3 dB noise figure, over 20 dB of gain and designed to be an easy-to-use drop-in with any surface mount PCB application.

Features

  • 5x5 mm Surface Mount Package (5.0 x 5.0 x 1.25 mm).
  • Integrated DC block and choke.
  • 50 Ω Input and Output Match.
  • Single Positive Supply Pin.
  • No Negative Gate Bias Specifications (Vd=3.0V, Idd=65mA).
  • Broadband RF from 18 to 32 GHz.
  • High Gain of 20dB.
  • Low Gain Flatness: ± 1dB.
  • Typical Noise Figure of 2.8 dB.
  • Typical OIP3 of 19dBm.

📥 Download Datasheet

Datasheet Details

Part number AMMP-6231
Manufacturer AVAGO
File Size 532.55 KB
Description 18 to 32 GHz GaAs Low Noise Amplifier
Datasheet download datasheet AMMP-6231 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AMMP-6232 18 to 32 GHz GaAs High Linearity LNA AVAGO TECHNOLOGIES
AMMP-6233 18 to 32 GHz GaAs Low Noise Amplifer AVAGO TECHNOLOGIES
AMMP-6220 6-20 GHz Low Noise Amplifer AVAGO TECHNOLOGIES
AMMP-6220 6-20 GHz Low Noise Amplifer Agilent Technologies
AMMP-6222 7 to 21 GHz GaAs High Linearity LNA AVAGO TECHNOLOGIES

Other Datasheets by AVAGO

Part Number Description
AMMP-6220 Low Noise Amplifier
AMMP-6120 8-24 GHz x2 Frequency Multiplier
AMMP-6125 10-24 GHz x2 Frequency Multiplier
AMMP-6333 Amplifier
AMMP-6421 13-16 GHz 1W Power Amplifier

Full PDF Text Transcription

Click to expand full text
AMMP-6231 18 to 32 GHz GaAs Low Noise Amplifier Data Sheet Description Avago Technologies AMMP-6231 is a high gain, low-noise amplifier that operates from 18 GHz to 32 GHz. It has a 3 dB noise figure, over 20 dB of gain and designed to be an easy-to-use drop-in with any surface mount PCB application. Popular applications include microwave radios, 802.16 and satellite VSAT or DBS receivers. The fully integrated microwave circuit eliminated the complex tuning and assembly processes typically required by hybrid (discrete-FET) amplifiers. The surface mount package allows elimination of “chip & wire” assembly for lower cost. The device has 50 Ω input and output match and is unconditionally stable. The MMIC has fully integrated input and output DC blocking capacitors and bias choke.
Published: |