Datasheet4U Logo Datasheet4U.com

ATR7039 - SiGe Frequency Doubler

General Description

The 5.8-GHz frequency doubler IC is designed with Atmel’s Silicon-Germanium (SiGe) process and provides a high conversion gain.

The device consists of a doubler stage, a filter and a driver amplifier with an output power of 11 dBm.

The output stage was realized using an open-collector structure.

Key Features

  • Input Frequency Range 2.7 GHz to 3.0 GHz POUT Typically 12 dBm at 5.8 GHz PIN Typically 0 dBm VCC 3.0V to 3.9V CW Mode Operation Package: QFN16 Benefits.
  • Ramping Control Extends Battery Lifetime.
  • AC Input Coupling Saves External Capacitors.
  • Extremely Low BOM for.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ATR0839 4-Channel LVDS Laser Driver ATMEL
ATR0840 4-channel Laser Driver ATMEL
ATR0842 4-channel LVDS Laser Diode Driver ATMEL
ATR0843 4-channel Laser Driver ATMEL
ATR0844 4-channel Laser Driver ATMEL

Other Datasheets by Atmel (now Microchip Technology)

Part Number Description
ATR7032 High Gain Power Amplifier
ATR7035 WDCT Power AMplifier
ATR7040 WDCT Power AMplifier
ATR0600 GPS Front-End
ATR0601 GPS FRONT-END

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TM Features • • • • • • Input Frequency Range 2.7 GHz to 3.0 GHz POUT Typically 12 dBm at 5.8 GHz PIN Typically 0 dBm VCC 3.0V to 3.9V CW Mode Operation Package: QFN16 Benefits • Ramping Control Extends Battery Lifetime • AC Input Coupling Saves External Capacitors • Extremely Low BOM for Application 2.9 GHz to 5.8 GHz SiGe Frequency Doubler IC ATR7039 Preliminary Electrostatic sensitive device. Observe precautions for handling. www.DataSheet4U.com 1. Description The 5.8-GHz frequency doubler IC is designed with Atmel’s Silicon-Germanium (SiGe) process and provides a high conversion gain. The device consists of a doubler stage, a filter and a driver amplifier with an output power of 11 dBm. The output stage was realized using an open-collector structure.