AT90SC288144RT
Key Features
- High-performance, Low-power secureAVR™ Enhanced RISC Architecture - 135 Powerful Instructions (Most Executed in a Single Clock Cycle) Low Power Idle and Power-down Modes Bond Pad Locations Conforming to ISO 7816-2 ESD Protection to ± 4000V Operating Ranges: 1.62 to 5.5V Compliant with GSM, 3GPP and EMV 2000 Specifications; PC Industry Compatible Available in Wafers, Modules, and Industry-standard Packages Memory
- 288K Bytes of ROM Program Memory
- 144K Bytes of EEPROM, Including 128 OTP Bytes and 384-byte Bit-addressable Area - 1 to 128-byte Program / Erase - 1 ms Program / 1 ms Erase - Typically More than 500,000 Write/Erase Cycles at a Temperature of 25oC - 10 Years Data Retention
- EEPROM Erase Only Mode
- Write EEPROM With or Without Autoerase - Bit-write Mode (Optional) - Full or Partial Page Erase Mode (Optional) - Block Erase Mode (Optional)
- 6K Bytes of RAM Secure Microcontroller for Smart Cards AT90SC 288144RT Summary Peripherals
- One ISO 7816 Controller * * * * * * *
- - Up to 625kbps at 5 MHz - Compliant with T=0 and T=1 Protocols One I/O Port Programmable Internal Oscillator (Up to 20 MHz on ROM) Two 16-bit Timers Random Number Generator (RNG) 2-level, 7-vector Interrupt Controller Hardware DES and Triple DES (DPA Resistant) Checksum Accelerator CRC 16 Engine (Compliant with ISO/IEC 3309) Security * * * * * *
- Dedicated Hardware for Protection Against SPA/DPA Attacks Protection Against Physical Attack Environmental Protection Systems Voltage Monitor Frequency Monitor Light Protection Secure Memory Management/Access Protection (Supervisor Mode) Development Tools
- Voyager Emulation Platform (ATV2 Standard) to Support Software Development
