ATmega64RFR2 Datasheet | Atmel

ATmega256/128/64RFR2 Features - Network support by hardware assisted Multiple PAN Address Filtering - Advanced Hardware assisted Reduced Power Consumption - High Performance, Low Power AVR® 8-Bit Microcontroller - Advanced RISC Architecture - 135 Powerful Instructions - Most Single Clock Cycle Execution - 32x8 General Purpose Working Registers / On-Chip 2-cycle Multiplier - Up to 16 MIPS Throughput at 16 MHz and 1.8V - Fully Static Operation - Non-volatile Program and Data Memories - 256K/128K/64K Bytes of In-System Self-Programmable Flash - Endurance: 10’000 Write/Erase Cycles @ 125°C (25’000 Cycles @ 85°C) - 8K/4K/2K Bytes EEPROM - Endurance: 20’000 Write/Erase Cycles @ 125°C (100’000 Cycles @ 25°C) - 32K/16K/8K Bytes Internal SRAM - JTAG (IEEE std. 1149.1 pliant) Interface - Boundary-scan Capabilities According to the JTAG Standard - Extensive On-chip Debug Support - Programming of Flash EEPROM, Fuses and Lock Bits through the JTAG interface - Peripheral Features - Multiple Timer/Counter & PWM channels - Real Time Counter with Separate Oscillator - 10-bit, 330 ks/s A/D Converter; Analog parator; On-chip Temperature Sensor - Master/Slave SPI Serial Interface - Two Programmable Serial USART - Byte Oriented 2-wire Serial Interface - Advanced Interrupt Handler and Power Save Modes - Watchdog Timer with Separate On-Chip...