ATXMEGA192D3
Overview
- High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller
- Non-volatile Program and Data Memories - 64K - 256K Bytes of In-System Self-Programmable Flash - 4K - 8K Bytes Boot Code Section with Independent Lock Bits - 2K - 4K Bytes EEPROM - 4K - 16K Bytes Internal SRAM Peripheral Features - Four-channel Event System - Five 16-bit Timer/Counters Four Timer/Counters with 4 Output Compare or Input Capture channels One Timer/Counters with 2 Output Compare or Input Capture channels High Resolution Extensions on two Timer/Counters Advanced Waveform Extension on one Timer/Counter - Three USARTs IrDA Extension on 1 USART - Two Two-Wire Interfaces with dual address match(I2C and SMBus compatible) - Two SPI (Serial Peripheral Interfaces) - 16-bit Real Time Counter with Separate Oscillator - One Sixteen-channel, 12-bit, 200ksps Analog to Digital Converter - Two Analog Comparators with Window compare function - External Interrupts on all General Purpose I/O pins - Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator Special Microcontroller Features - Power-on Reset and Programmable Brown-out Detection - Internal and External Clock Options with PLL - Programmable Multi-level Interrupt Controller - Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby - Advanced Programming, Test and Debugging Interface PDI (Program and Debug Interface) for programming, test and debugging I/O and Packages - 50 Programmable I/O Lines - 64-lead TQFP - 64-pad QFN Operating Voltage - 1.6 - 3.6V Speed performance - 0 - 12 MHz @ 1.6 - 3.6V - 0 - 32 MHz @ 2.7 - 3.6V
- 8/16-bit XMEGA D3 Microcontroller ATxmega256D3 ATxmega192D3 ATxmega128D3 ATxmega64D3 * * *
