Positive voltage Regulators
These voltage regulators are designed as fixed-voltage regulators for a wide variety
of applications including local, on-card regulation. Although designed primarily as a
fixed voltage regulator, these devices can be used with external components to
obtain adjustable voltages and currents.
■ Output current in excess of 1.5A
■ No external components required
■ Output Voltages (5V, 6V, 8V, 9V, 10V, 12V, 15V, 18V)
■ Internal Thermal shutdown and SOA protection
■ Output voltage offered in 4% Tolerance
■ Pb-Free Packages are available
■ High ESD Level (HBM>8000V, MM>800V)
The input voltage must remain typically
2.0V above the output voltage even during
the low point on the ripple voltage.
* CI is required if regulator is located
an appreciable Distance from power filter.
* CO improves transient response.
Values of ≤ 0.1 µF could cause instability.