Datasheet4U Logo Datasheet4U.com

APW8723 - PWM Controller

General Description

The APW8723 is a voltage mode, fixed 300kHz switching frequency, synchronous buck converter.

The APW8723 allows wide input voltage that is either a single 5V~12V or two supply voltage(s) for various applications.

Key Features

  • Wide 5V to 12V Supply Voltage Power-On-Reset Monitoring on VCC Excellent Output Voltage Regulations - 0.8V Internal Reference - ±1% Over Temperature Range General.

📥 Download Datasheet

Datasheet Details

Part number APW8723
Manufacturer ANPEC
File Size 742.43 KB
Description PWM Controller
Datasheet download datasheet APW8723 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
APW1172 2.5A SWITCH STEP DOWN SWITCHING REGULATOR Anpec Electronics Coropration
APW1173 2A SWITCH STEP DOWN SWITCHING REGULATOR Anpec Electronics Coropration
APW34063 DC/DC Switching Regulator Anpec Electronics Coropration
APW7004 Synchronous-Rectifier PWM Controller Anpec Electronics Coropration
APW7015 Advanced PWM and Dual Linear Power Controller Anpec Electronics Coropration

Other Datasheets by ANPEC

Part Number Description
APW8720 Single Buck Voltage Mode PWM Controller
APW8720A Single Buck Voltage Mode PWM Controller
APW8720B Single Buck Voltage Mode PWM Controller
APW8722 PWM Controller
APW8722A PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
APW8723 5V to 12V Single Buck Voltage Mode PWM Controller Features • • • Wide 5V to 12V Supply Voltage Power-On-Reset Monitoring on VCC Excellent Output Voltage Regulations - 0.8V Internal Reference - ±1% Over Temperature Range General Description The APW8723 is a voltage mode, fixed 300kHz switching frequency, synchronous buck converter. The APW8723 allows wide input voltage that is either a single 5V~12V or two supply voltage(s) for various applications. The power-on-reset (POR) circuit monitors the VCC supply voltage to prevent wrong logic controls. A built-in soft-start circuit prevents the output voltages from overshoot as well as limits the input current. An internal 0.