APL3531 Overview
The APL3531 is a power-distribution switch with some protection functions that can deliver current up to 1A. The device incorporates a 100mΩ N-channel MOSFET power switch that is controlled by an enable logic pin and dedicated to soft-start ramp-up rate control that can be used in application where the inrush current is concerned. The device integrates some protection.
APL3531 Key Features
- 100mΩ High Side MOSFET
- 1A Continuous Current
- Wide Supply Voltage Range: 1.5V to 5.5V
- Current-Limit and Short-Circuit Protections
- Under-Voltage Lockout Protection
- Reverse Current Blocking when Switch
- Over-Temperature Protection
- Logic Level Enable Input
- UL Approved-Fild No. E328191
- UL-CB Scheme IEC/EN62368-1 Certified