Datasheet4U Logo Datasheet4U.com

Am3114 - Dual 128-Bit Static Shift Register

Description

The Am3114 is a dual 128-bit static shift register built using P-channel silicon gate MOS technology.

The two registers each have a two-input multiplexer on their inputs, so that input data may be selected from one of two sources.

📥 Download Datasheet

Datasheet preview – Am3114

Datasheet Details

Part number Am3114
Manufacturer AMD
File Size 163.75 KB
Description Dual 128-Bit Static Shift Register
Datasheet download datasheet Am3114 Datasheet
Additional preview pages of the Am3114 datasheet.

📁 Similar Datasheet

  • AM3129 - Filter Bank (Atlanta Micro)
  • AM313 - PROXIMITY DETECTOR (Analog Micro)
  • AM30 - Axial Molded Inductors (Allied Components International)
  • AM30-100K-RC - Axial Molded Inductors (Allied Components International)
  • AM30-101J-RC - Axial Molded Inductors (Allied Components International)
  • AM30-102J-RC - Axial Molded Inductors (Allied Components International)
  • AM30-111J-RC - Axial Molded Inductors (Allied Components International)
  • AM30-120K-RC - Axial Molded Inductors (Allied Components International)
  • AM30-121J-RC - Axial Molded Inductors (Allied Components International)
  • AM30-131J-RC - Axial Molded Inductors (Allied Components International)
Other Datasheets by AMD
  • Am3212 - 8-Bit Input/Output Port
  • Am3216 - 4-Bit Parallel Bidirectional Bus Driver
  • Am3226 - 4-Bit Parallel Bidirectional Bus Driver
  • AM3341 - 64 x 4 FIFO Serial Memory
  • Am3514 - ROM
  • AM386 - Microprocessors
  • AM386SC300 - 32-Bit Microprocessor and System Logic
  • AM386SXL - Embedded Microprocessors

Full PDF Text Transcription

Click to expand full text
Am 2814/3114 Dual 128-Bit Static Shift Register Distinctive Characteristics • 2nd Source to Texas Instruments 3114 • Operation guaranteed from DC to 2.5MHz. • 100% reliability assurance testing in compliance with MIL-ST D-883 • Full military grade devices available FUNCTIONAL DESCRIPTION The Am3114 is a dual 128-bit static shift register built using P-channel silicon gate MOS technology. The two registers each have a two-input multiplexer on their inputs, so that input data may be selected from one of two sources. Both registers have a common clock input, and operate with a lowvoltage TTL clock signal. The registers shift on the LOW-toHIGH edge of the clock signal. Data at the inputs must be steady for a set-up time before and a hold time after this clock transition.
Published: |