AP1019 Datasheet PDF (Dual H-Bridge Motor Driver)

AP1019 - Dual H-Bridge Motor Driver

Description

The AP1019 is a dual H-Bridge Motor Driver to operate up to 9.0V power supply.

It has four drive modes of operation; Forward, Reverse, Brake and Standby.

It is capable to configure the input logic which is suitable for the PWM drive with the SEL terminal.

Features

Wide Motor Driving Voltage.
Power Supply Voltage.
Maximum Output Current (DC).
Maximum Output Current (Peak).
H-Bridge ON Resistance.
PWM Operation Frequency.
Under Voltage Detection Circuit.
Thermal Shut Down Circuit.
Operation Temperature Range.
Package 1.4V to 9.0V 2.7V to 5.5V 1.1A (max) 2.0A (Ta=25°C, 10ms/200ms) RON (TOP+BOT)=0.35Ω @Ta=25°C 1MHz(max) -30 ~ 85°C 16-pin WLCSP (1.96mm×1.96mm ) 017015009-E-01 -1- 2019/02 [AP1019] 3. Tabl.

Datasheet Details

Part number	AP1019
Manufacturer	AKM
File Size	571.20 KB
Description	Dual H-Bridge Motor Driver
Datasheet	AP1019 Datasheet
Additional preview pages of the AP1019 datasheet.

📁 Similar Datasheet

AP1017 - ELECTROMAGNETIC FLOWMETER (Automation Progetti)

AP1018 - ELECTROMAGNETIC FLOWMETER (Automation Progetti)

AP100-B10 - AC Current transducer (LEM)

AP100-B420L - AC Current transducer (LEM)

AP1001BSQ - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

AP1001BSQ-3 - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

AP1002BMX-3 - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

AP1003BMP-3 - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

AP1003BST - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

AP1003BST-3 - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

Full PDF Text Transcription

Click to expand full text

[AP1019] AP1019 9.0V Dual H-Bridge Motor Driver IC 1. General Description The AP1019 is a dual H-Bridge Motor Driver to operate up to 9.0V power supply. It has four drive modes of operation; Forward, Reverse, Brake and Standby. It is capable to configure the input logic which is suitable for the PWM drive with the SEL terminal. The driver works up to 1MHz, therefore it can suppress the current ripple and reduce the motor sound. The AP1019 has an N-ch LDMOS FET for both high side and low side of the output circuit, realizing to adopt a small WL-CSP package. In addition, the AP1019 has under-voltage detection and thermal shutdown circuits. It is suitable for driving various small motors. 2.

Published: Jun 18, 2018 |