Datasheet4U Logo Datasheet4U.com

AP1014AEC - Dual H-Bridge Motor Driver

General Description

The AP1014AEC has four drive mode of forward, reverse, brake and standby by 2 channel H-bridge Motor Driver corresponding to operating voltage 7.0V.

It is possible to set to the input logic which was suitable for the PWM drive with the SEL terminal.

Key Features

  • Control Supply Voltage 2.7V to 5.5V.
  • Wide Motor Drive Operating Voltage 2.0V to 7.0V.
  • Maximum Output Current (DC) 1.1A @Ta=25C, 0.8A @Ta=85C.
  • Maximum Output Current (Peak) 2.0A (Ta=25C, 10ms/200ms).
  • H-Bridge ON Resistance RON (TOP+BOT)=0.35Ω @Ta=25C.
  • Built-in Under Voltage Detection Circuit Detect VC Supply Voltage under 2.2V.
  • Built-in Thermal Shut Down Circuit (Tj) 175C.
  • Junction Temperature 150C.
  • Package 16-pin WL-CSP (1.96mm×.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP1017 ELECTROMAGNETIC FLOWMETER Automation Progetti
AP1018 ELECTROMAGNETIC FLOWMETER Automation Progetti
AP100-B10 AC Current transducer LEM
AP100-B420L AC Current transducer LEM
AP1001BSQ N-CHANNEL ENHANCEMENT MODE POWER MOSFET Advanced Power Electronics

Other Datasheets by AKM (Asahi Kasei Microdevices)

Part Number Description
AP1010 H-Bridge Motor Driver
AP1015BEN H-Bridge Motor Driver
AP1016AEN Dual H-Bridge Motor Driver
AP1017 12V 1ch H-Bridge Motor driver
AP1018 Dual H-Bridge Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
[AP1014AEC] AP1014AEC 7.0V Dual H-Bridge Motor Driver IC 1. Genaral Description The AP1014AEC has four drive mode of forward, reverse, brake and standby by 2 channel H-bridge Motor Driver corresponding to operating voltage 7.0V. It is possible to set to the input logic which was suitable for the PWM drive with the SEL terminal. The AP1014AEC layout N-ch LDMOS FET in high side and low side in output circuit and realize a small WL-CSP package. Also it has under voltage detection and thermal shut down circuits. It is suitable for driving various small motor. 2. Features  Control Supply Voltage 2.7V to 5.5V  Wide Motor Drive Operating Voltage 2.0V to 7.0V  Maximum Output Current (DC) 1.1A @Ta=25C, 0.8A @Ta=85C  Maximum Output Current (Peak) 2.