AM1D-2415DH30 Datasheet | AIMTEC

AM1D Series 1 watt dc-dc converters - - - 7PIN SIP PACKAGE LOW RIPPLE & NOISE HIGH EFFICIENCY UP TO 80% - - - INPUT/OUTPUT ISOLATION: 1000, 3000, 4000 & 5200VDC OPERATING TEMPERATURE: -40°C ... +85°C PIN-PATIBLE WITH MULTIPLE MANUFACTURERS DC-DC CONVERTERS GENERAL DESCRIPTION Our AM1D series is a family of cost effective 1W single, dual, dual separate output isolated DC-DC converters. These converters achieve low cost and ultra-miniature SIP7 pin size without promising performance and reliability. Two hundred sixteen models operates from input voltages of 5, 12 & 24VDC; producing output voltage levels of 3.3, 5, 7.2, 9, 12, 15, 18, 24, ±3.3, ±5, ±7.2, ±9, ±12, ±15, ±18 & ±24VDC. Full SMD-design and a 100% production test of parameters ensures a high reliability in this product. ELECTRICAL SPECIFICATIONS Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified Input Specifications: Voltage Filter Isolation Specifications: Rated voltage (60 sec) ±10% Capacitor General Specifications: Efficiency Switching frequency 65% to 80% 125KHz, typ. 100% load Resistance Capacitance Output Specifications: Voltage balance (dual output) Voltage accuracy Ripple & noise (at 20MHz BW) Short circuit protection Line voltage regulation Load voltage regulation Temperature coefficient 1000VDC (all models) 3000, 4000 & 5200VDC (single/dual output) > 1000MOhm 60p F, typ. ±1% ±5%, max 75m Vp-p, max. Momentary ±1.2% / 1.0% of Vin ±8%, load=20~100% ±0.02%/°C, typ. Environmental Specifications: Operating temperature (ambient) -40°C ... +85°C Storage temperature -55°C ... +125°C Case Temperature +95°C, max. Derating None required Humidity (non-condensing) Up to 90% Cooling Free-air Convection Physical Specifications: Dimensions Weight Case material 19.50x6.00x10.00mm 0.76x0.24x0.39inches 2g Non-conductive black plastic MTBF: > 1,191,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C) Specifications are subject to change without...