Datasheet4U Logo Datasheet4U.com

TS08NE - 8-Channel Self Calibration Capacitive Touch Sensor

Description

of change 1.0 First Creation AD Logo Changed 2.0 Revise the MKS description Add the POD specification - GREATEK site 2.1 Remove the POD specification - SEMITEQ site Add “Revision History” page 2.2 Add the TS08NE Specification Revise the Sensitivity Step and CS implementation 3.0 Remove TS0

📥 Download Datasheet

Datasheet Details

Part number TS08NE
Manufacturer ADSemiconductor
File Size 614.50 KB
Description 8-Channel Self Calibration Capacitive Touch Sensor
Datasheet download datasheet TS08NE Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS08N02S Single N-Channel Power MOSFET ETC
TS08N03N3 Single N-Channel Power MOSFET Synmosaic
TS08 Sensitive Gate SCR STMicroelectronics
TS08S METALLIZED POLYPROPYLENE FILM CAPACITOR Suntan
TS003 3 channel remote telephone interface hager

Other Datasheets by ADSemiconductor

Part Number Description
TS08N 8-Channel Self Calibration Capacitive Touch Sensor
TS08P 8-Channel Self Calibration Capacitive Touch Sensor
TS01S 1-Ch Differential Sensitivity Calibration Capacitive Touch Sensor
TS04P 4-CH Auto Sensitivity Calibration Capacitive Touch Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS08NE 8-Channel Self Calibration Capacitive Touch Sensor SPECIFICATION V3.0 작성 검토 팀장 Marketing QA Approval OCT 2016 Confidential ADSemiconductor ADSemiconductor® TS08NE (8-CH Auto Sensitivity Calibration Capacitive Touch Sensor) General The TS08NE is 8-Channel capacitive sensor with auto sensitivity calibration. And the supply voltage range is from 2.5 to 5.5V The TS08NE has Parallel output ports(OUT1~OUT8) with open drain NMOS structure. The TS08NE has R_BIAS pin. The R_BIAS is connected to the resistor to decide the oscillator and internal bias current. The sensing frequency, internal clock frequency and current consumption are therefore able to be adjusted with R_BIAS. The TS08NE has RESET pin and must be reset by external reset pulse before normal operation starts.
Published: |