Datasheet4U Logo Datasheet4U.com

ACE714B - Step-up DC/DC Converter Backlight Driver

General Description

The ACE714B is a fixed frequency, constant current step-up DC/DC converter ideal for driving LEDs used in backlighting applications on cellular phones, PDAs and digital cameras etc.

Output voltage of up to 28V can be derived, and from a 2.5V input three white LED’s can be driven in series.

Key Features

  • Input voltage range : 2.5V-5.5V.
  • Output voltage range : up to 28V.
  • Low 104mV feedback voltage.
  • Oscillation frequency : 1.2MHz.
  • Typical Efficiency : 88%.
  • Control : PWM control.
  • Stand-by Current :.

📥 Download Datasheet

Datasheet Details

Part number ACE714B
Manufacturer ACE Technology
File Size 335.62 KB
Description Step-up DC/DC Converter Backlight Driver
Datasheet download datasheet ACE714B Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACE-3600 RNC-Site Gateway Manual RAD Data Communications
ACE-716 RUGGED AC/DC INPUT 150W POWER SUPPLY ETC
ACE1001 Arithmetic Controller Engine Fairchild Semiconductor
ACE1101 Arithmetic Controller Engine (ACEx) for Low Power Applications Fairchild Semiconductor
ACE1202 Arithmetic Controller Engine Fairchild Semiconductor

Other Datasheets by ACE Technology

Part Number Description
ACE714 High Efficiency Low Noise PFM Step-up DC/DC Converter
ACE714C Variable Frequency Step-up DC/DC Converter
ACE710 0.6A 3.3V/5V Synchronous Boost DC/DC Converter
ACE710C 1A Synchronous PWM Boost converter
ACE711E Step-Up DC/DC Regulator 20V

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ACE714B Step-up DC/DC Converter Backlight Driver Description The ACE714B is a fixed frequency, constant current step-up DC/DC converter ideal for driving LEDs used in backlighting applications on cellular phones, PDAs and digital cameras etc. Output voltage of up to 28V can be derived, and from a 2.5V input three white LED’s can be driven in series. Luminance of the LED’s is controlled by changing the duty cycle of a PWM signal applied to the CE pin. In addition, an internal MOSFET with an Rds-on of 0.3Ω is used. Allow profile and small board area solution can be achieved using a chip coil and an ultra small ceramic output capacitor. Features  Input voltage range : 2.5V-5.5V  Output voltage range : up to 28V  Low 104mV feedback voltage  Oscillation frequency : 1.