Datasheet4U Logo Datasheet4U.com

ACE703 - White LED PFM Step-Up DC-DC Converter

General Description

The ACE703 is a PFM step-up DC-DC converter specifically designed to drive white LEDs with a constant current.

It can deliver stable constant output current from 0mA to 500mA by adjusting the external resistor.

Key Features

  • Low start-up voltage (when the output current is 1mA)--------------------------0.8V The converter can output constant voltage from 2.5V to 6.0V or it can output constant current from 0 to 500mA by adjusting the external resistor. Output current accuracy -----------±10％ Low temperature-drift coefficient of the output current------------------±100ppm/℃ Only four external components are necessary: an inducto.

📥 Download Datasheet

Datasheet Details

Part number ACE703
Manufacturer ACE Technology
File Size 644.88 KB
Description White LED PFM Step-Up DC-DC Converter
Datasheet download datasheet ACE703 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACE-3600 RNC-Site Gateway Manual RAD Data Communications
ACE-716 RUGGED AC/DC INPUT 150W POWER SUPPLY ETC
ACE1001 Arithmetic Controller Engine Fairchild Semiconductor
ACE1101 Arithmetic Controller Engine (ACEx) for Low Power Applications Fairchild Semiconductor
ACE1202 Arithmetic Controller Engine Fairchild Semiconductor

Other Datasheets by ACE Technology

Part Number Description
ACE701 PFM STEP-UP DC/DC Converter
ACE705 Step-up DC/DC Controller
ACE707A Micro Power Step-up DC-DC Converter
ACE708 300mA Iout 0.85V startup 1MHz Synchronous Boost Converter
ACE709 1A True Shut-Off Synchronous Boost DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
  www.DataSheet4U.com                                                                                          ACE703                                               Technology Description White LED PFM Step-Up DC-DC Converter The ACE703 is a PFM step-up DC-DC converter specifically designed to drive white LEDs with a constant current. It can deliver stable constant output current from 0mA to 500mA by adjusting the external resistor. The ACE703 can drive one or more LEDs in parallel connection, also it can drive two in series, several in parallel connection from one or two battery cells. With overvoltage limit protection circuit interiorly, the chip and the external circuits will be safe even if the load is not connected.